Monoprice Inc.
Monoprice 141484 Cat6A Bulk Cable 500 ft Black F/UTP 23AWG CMR 550MHz
Shielded Cat6A bulk cable delivers 550 MHz bandwidth for 10 GbE runs up to 500 ft
- TypeBulk Networking Cables
- Length500 ft.
- ColorBlack
- FeaturesShielded Twisted Pair (F/UTP) Category 6A Ethernet cable. 23
- Supports 10 Gbps speeds with 550 MHz tested bandwidth
- Pure bare copper conductors ensure reliable signal integrity
- F/UTP shielding reduces EMI interference in dense installs
- CMR riser rating meets UL 444 and TIA-568-C.2 fire codes
- 500 ft reel-in-box with length markings simplifies custom runs
Built for 10 GbE runs
This Monoprice Cat6A bulk cable delivers 500 feet of 23 AWG solid bare copper conductors in a black F/UTP jacket. It is CMR riser rated and tested to 550 MHz, making it suitable for 10 Gigabit Ethernet links in commercial and residential structured wiring projects.
Steps up from Cat6 when bandwidth matters
The shielded construction and 550 MHz rating provide headroom for 10 GBASE-T over the full 100 metre channel where unshielded Cat6 cannot guarantee performance. The upgrade is worth it for new backbone runs, PoE+ deployments or any installation that must meet TIA‑568‑C.2 and UL 444 fire codes without re‑pulling cable later.
Suits installers pulling permanent links
Contractors and IT teams terminating their own patch cords will value the length markings on the reel‑in‑box for quick cut‑to‑length work. It is not for buyers needing pre‑terminated patch cords, outdoor burial rated jacket or a smaller spool for a single desktop drop.
Highlights
- Supports 10 Gbps speeds with 550 MHz tested bandwidth
- Pure bare copper conductors ensure reliable signal integrity
- F/UTP shielding reduces EMI interference in dense installs
- CMR riser rating meets UL 444 and TIA-568-C.2 fire codes
- 500 ft reel-in-box with length markings simplifies custom runs
Specifications
| Brand | Monoprice |
|---|---|
| Model | 141484 |
| Type | Bulk Networking Cables |
| Length | 500 ft. |
| Color | Black |
| Features | Shielded Twisted Pair (F/UTP) Category 6A Ethernet cable. 23AWG solid, pure bare copper conductors. |
Questions about this item
What conduit or tray space is needed for the 23AWG solid conductors and overall foil shield?
The cable uses 23AWG solid bare copper with an overall foil shield, so allow enough conduit fill for a 500-foot reel of shielded Cat6A; exact diameter is not in the spec sheet.
Which step is most often missed when terminating the foil-shielded pairs?
The drain wire must be bonded to the shielded jack or patch-panel ground lug; skipping this bond leaves the 550MHz shield ineffective against EMI.
How often should the 500-foot reel be inspected after installation for shield continuity?
Verify shield continuity at each termination point during commissioning; the UL 444 and TIA-568-C.2 listed jacket is rated for permanent riser runs with no scheduled re-test interval.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



