Monoprice Inc.
Monoprice 141095 Power Cord Splitter 3 ft C14 to 2x C13 16AWG 13A
Splits one C14 outlet into two C13 connections using 16AWG conductors rated for 13A and 100-250VAC
- TypeOthers
- Length0.9144
- Connector Number2
- Features16AWG conductors.
- Powers two devices from one outlet with a Y-splitter design
- Handles up to 13 amps through 16AWG conductors
- Works worldwide on 100 to 250 VAC supplies
- Uses IEC 60320 C14 input and dual C13 outputs
- Three-foot length reduces cable clutter in racks
Monoprice 141095 Power Cord Splitter
This three-foot Y-splitter converts a single IEC 60320 C14 inlet into two C13 outlets. It suits data-centre racks, office UPS units or any 100-250 VAC environment where two devices must share one mains connection. The 16 AWG conductors keep the cable slim for tidy routing.
Capacity and headroom
Rated at 13 amps maximum current, the splitter comfortably feeds a pair of typical workstations or networking gear drawing moderate power. Combined loads approaching the 13 A limit will saturate the conductors, so high-draw servers or multiple GPU systems should use dedicated feeds instead.
Replaces bulky dual-cable runs
The assembly removes the need for two separate cords running from a PDU or wall outlet, reclaiming space on crowded power strips. The upgrade is worthwhile when rack density or cable-management policies demand fewer individual leads; it adds no benefit where each device already has its own protected circuit.
Highlights
- Powers two devices from one outlet with a Y-splitter design
- Handles up to 13 amps through 16AWG conductors
- Works worldwide on 100 to 250 VAC supplies
- Uses IEC 60320 C14 input and dual C13 outputs
- Three-foot length reduces cable clutter in racks
Specifications
| Brand | Monoprice |
|---|---|
| Model | 141095 |
| Type | Others |
| Length | 0.9144 |
| Connector Number | 2 |
| Features | 16AWG conductors. |
Questions about this item
Will the 16 AWG conductors on this splitter safely handle the 13 A draw from my older server power supplies?
The 16 AWG conductors are rated for up to 13 amps, matching the maximum current your server supplies can draw at 100 to 250 VAC.
How can I confirm the C14 to dual C13 splitter is delivering power correctly once installed?
Verify both connected devices power on normally and check that the splitter body remains cool during operation.
Does the 3 ft Monoprice 141095 include mounting hardware or only the Y-splitter cord itself?
The package contains only the 3-foot Y-splitter cord with one C14 plug and two C13 connectors; no mounting hardware is included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114917BTC
In stock
