We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter power cord 1.17 ft C14 to two C13 connectors

Monoprice Inc.

Monoprice 141094 power cord splitter 1.17 ft C14 to 2x C13 16AWG 13A

SKU CH-PBNX-2MMRP

Splits one C14 outlet into two C13 connections, using 16 AWG conductors rated for 13 A at 100–250 VAC

  • TypeOthers
  • Length0.3556
  • Connector Number2
  • Features16AWG conductors.
  • Powers two devices from one outlet with a Y-splitter design
  • 16AWG conductors support up to 13 amps maximum current
  • Rated for 100-250 VAC applications worldwide
  • Compact 1.17 ft length reduces cable clutter in racks
  • IEC 60320 C14 to dual C13 connectors fit standard equipment

Power cord splitter for dual C13 devices

This Y-splitter connects two C13-equipped devices such as servers or workstations to a single C14 outlet. It suits data-centre racks, UPS units or wall sockets where outlet space is limited. The 1.17 ft length keeps cable runs short and tidy.

Check outlet rating and device connectors

Verify that the source outlet or PDU provides a C14 inlet and can supply the combined load of both attached devices. Each leg uses 16AWG conductors rated for up to 13 amps at 100-250 VAC, so confirm your equipment stays within that limit. Ensure both devices have standard IEC 60320 C14 power inlets.

Replaces two separate C13 cords from one C14 source

The splitter removes the need for a second outlet or a bulky power strip when powering a pair of devices from one feed. It is worth adopting when rack density or UPS port count is constrained and the total draw remains under 13 amps. Not suited for loads exceeding that rating or for devices lacking C14 inlets.

Highlights

  • Powers two devices from one outlet with a Y-splitter design
  • 16AWG conductors support up to 13 amps maximum current
  • Rated for 100-250 VAC applications worldwide
  • Compact 1.17 ft length reduces cable clutter in racks
  • IEC 60320 C14 to dual C13 connectors fit standard equipment

Specifications

BrandMonoprice
Model141094
TypeOthers
Length0.3556
Connector Number2
Features16AWG conductors.

Questions about this item

What connectors are included on the 1.17 ft splitter and do I need any extra cables?

The splitter has one IEC 60320 C14 plug and two IEC 60320 C13 sockets. Your devices must already have C14 inlets to plug into the two C13 outlets.

The title shows 16AWG and 13A — which version should I pick for my setup?

There is only one version: 16AWG conductors rated for up to 13 amps at 100-250 VAC. Choose it if your combined load stays within 13 amps.

What does the 13A rating mean when I plug two servers into a single UPS outlet?

The 13A limit applies to the total current drawn by both devices together. Ensure the combined draw of the two servers does not exceed 13 amps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.