We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Monoprice Inc.

Monoprice 141089 power extension cord splitter 0.9144 m NEMA 5-15P to 2x IEC 60320 C13 18AWG 10A 100-250 VAC

SKU CH-QQJ5-BYTKK

A Y-splitter powers two C14 devices from one NEMA 5-15P outlet using 18AWG conductors rated for 10 A at 100-250 VAC

  • TypeOthers
  • Length0.9144
  • Connector Number2
  • Features18AWG conductors.
  • Powers two C13 devices from one wall outlet
  • 18AWG conductors carry up to 10 amps safely
  • Rated for 100-250 VAC worldwide use
  • 9144 metre length reduces cable clutter
  • NEMA 5-15P plug fits standard sockets

Splitter for dual C13 devices

This power extension cord splitter connects two devices with IEC 60320 C14 inlets to a single NEMA 5-15P wall outlet. It reduces cable clutter and frees space on power strips, UPS units, or wall receptacles in data centres and office setups. The Y-style design uses 18AWG conductors rated for up to 10 amps across 100-250 VAC applications.

Replaces separate cords for paired gear

Use this splitter instead of running two individual power cords when you have a paired server and monitor, dual workstations, or a PC and peripherals sharing one outlet. The jump is worth it when outlet count is limited and total draw stays within the 10-amp rating. It is not for buyers who need more than two C13 connections or a higher amperage feed.

Plug-and-play with outlet spacing check

Installation is straightforward: plug the NEMA 5-15P end into the outlet and attach each C13 connector to the device inlets. Ensure the combined load does not exceed 10 amps and that the short 0.9144-metre legs reach both devices without strain. What usually goes wrong is insufficient slack between widely spaced equipment.

Highlights

  • Powers two C13 devices from one wall outlet
  • 18AWG conductors carry up to 10 amps safely
  • Rated for 100-250 VAC worldwide use
  • 9144 metre length reduces cable clutter
  • NEMA 5-15P plug fits standard sockets

Specifications

BrandMonoprice
Model141089
TypeOthers
Length0.9144
Connector Number2
Features18AWG conductors.

Questions about this item

Will the 0.9144 m Y-splitter reach both C14 inlets on my rack-mounted servers?

The cord is 0.9144 m long from the NEMA 5-15P plug to the Y junction, then each IEC 60320 C13 branch adds its own length; measure from your outlet to each C14 inlet to confirm reach.

Which way does the NEMA 5-15P plug orient when inserted into a vertical UPS outlet?

The moulded NEMA 5-15P plug follows the standard North American polarised orientation; insert it with the ground pin down so the two flat blades match the outlet slots.

When should I replace the splitter if the 18AWG conductors show wear?

Inspect the SJT jacket and 18AWG wires regularly; replace the unit immediately if you see cracked insulation, exposed copper, melted connectors or if the 10 A rating is exceeded.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.