We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black IEC 60320 C20 to C21 power extension cord 1.8288 m 12 AWG

Monoprice Inc.

Monoprice 140136 power extension cord 60320 C20 to C21 12 AWG 1.8288 m

SKU CH-9BGV-MEC2K

Extend power connections for Cisco or Juniper network gear with 12 AWG conductors and IEC 60320 C20 to C21 connectors

  • TypeOthers
  • Length1.8288
  • Connector Number2
  • FeaturesConnect Cisco or Juniper Networks devices to a PDU or UPS in
  • Thick 12 AWG conductors handle high power loads for servers and routers
  • IEC 60320 C20 to C21 connectors fit Cisco and Juniper equipment
  • C21 design with beveled corners rated for higher temperature operation
  • Extends existing power cords 1.8288 metres for flexible rack placement
  • Heavy-duty construction replaces standard cords on high-output network devices

Heavy-duty 12 AWG extension cord

This Monoprice 140136 cable extends power connections between IEC 60320 C20 plugs and C21 connectors using thick 12 AWG conductors. It is built for servers, routers and other high-output network devices that demand a heavier-gauge cord. The 1.8288 m length adds placement flexibility in rack environments.

Check your inlet and outlet types

Verify that the source side of your power chain presents a C20 inlet and that the target device accepts a C21 connector. The C21 end has two bevelled corners and a higher temperature rating than a standard C13. Confirm the equipment you are powering uses a C22 male inlet, as found on many Cisco and Juniper units, before ordering.

Replaces standard cords on high-draw gear

This cord upgrades the factory-supplied lead when the original gauge cannot handle the sustained load of larger equipment. The jump is worth it when a server or network appliance requires the higher temperature rating and current capacity of a 12 AWG C21 connection to a PDU or UPS. It is not for devices that only accept C13 or C14 interfaces.

Highlights

  • Thick 12 AWG conductors handle high power loads for servers and routers
  • IEC 60320 C20 to C21 connectors fit Cisco and Juniper equipment
  • C21 design with beveled corners rated for higher temperature operation
  • Extends existing power cords 1.8288 metres for flexible rack placement
  • Heavy-duty construction replaces standard cords on high-output network devices

Specifications

BrandMonoprice
Model140136
TypeOthers
Length1.8288
Connector Number2
FeaturesConnect Cisco or Juniper Networks devices to a PDU or UPS in a data center.

Questions about this item

What connectors come on the 140136 cord and is any adapter needed?

The cord has an IEC 60320 C20 plug on one end and an IEC 60320 C21 connector on the other. No separate adapter is required; it plugs directly into a C20 inlet and a C22 outlet.

Why choose the 12 AWG version instead of a thinner gauge?

The 12 AWG conductors handle the higher current draw of servers, routers and other high-output network equipment without overheating.

What does the 1.8288 m length mean for rack placement?

At 1.8288 metres the cord reaches from a floor-mounted PDU or UPS to equipment in a standard rack, giving enough slack for cable management without excess coil.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.