Monoprice Inc.
Monoprice 140080 Power Extension Cord 0.9144 m NEMA 6-20P to IEC 60320 C13 14 AWG 15 A 125 V 1875 W Black
Extends power connections for servers and network devices with a NEMA 6-20P plug to IEC 60320 C13 connector, rated 15 A at 125 V
- TypeOthers
- Length0.9144
- Connector Number2
- FeaturesRecommended for high-performance computers and network devic
- Extends reach by 0.9144 m for flexible placement
- 14 AWG cable handles 15 A at 125 V for reliable power
- NEMA 6-20P plug connects to high-capacity PDU or UPS outlets
- IEC 60320 C13 fits standard C14 inlets on servers and monitors
- Rated 1875 W for high-performance computers and network devices
Power Extension Cord 0.9144 m NEMA 6-20P to IEC
This Monoprice 140080 extension cord connects a device with a male IEC 60320 C14 panel inlet to a NEMA 6-20P power source. The 14 AWG cable is rated for 15 A at 125 V, supporting loads up to 1875 W. It adds 0.9144 metres of reach between your equipment and the outlet or PDU.
Suited for data-centre racks
The cord is built for commercial gear such as servers, high-performance workstations and monitors that draw up to the rated 15 A. Installations needing a longer run, a different plug standard or a higher amperage rating will require an alternative cable.
14 AWG conductor rated 15 A / 1875 W at 125 V
This single specification determines whether the cord can safely carry your equipment's power draw. Verify the device nameplate does not exceed 15 A or 1875 W before using this extension.
Highlights
- Extends reach by 0.9144 m for flexible placement
- 14 AWG cable handles 15 A at 125 V for reliable power
- NEMA 6-20P plug connects to high-capacity PDU or UPS outlets
- IEC 60320 C13 fits standard C14 inlets on servers and monitors
- Rated 1875 W for high-performance computers and network devices
Specifications
| Brand | Monoprice |
|---|---|
| Model | 140080 |
| Type | Others |
| Length | 0.9144 |
| Connector Number | 2 |
| Features | Recommended for high-performance computers and network devices. |
Questions about this item
What voltage and wattage does the NEMA 6-20P to IEC C13 cord support?
The cord is rated for 125 volt and 1875 watt loads at 15 amp.
What connector spacing or clearance does the 3-foot cable need?
The 0.9144 m length links a C14 inlet to a 6-20P outlet with no extra clearance specified.
How do I attach the IEC C13 end to my device?
Mate the female C13 connector onto the male C14 panel inlet until it clicks, then plug the NEMA 6-20P into the power source.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



