We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8-foot power cord with NEMA 5-15P plug and IEC C15 connector

Monoprice 135116 14AWG NEMA 5-15P to IEC 60320 C15 8ft computer power cord

SKU CH-2NZS-QTA7K

Heavy-duty 14 AWG cord with NEMA 5-15P to IEC 60320 C15 connectors rated 15 A at 125 V for servers and high-power equipment

  • Length8 feet
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 125 volts; Current: 15 amps; Weight: 0.79 ounces; C
  • Thick 14AWG conductors handle high-power equipment demands
  • NEMA 5-15P to IEC 60320 C15 fits servers and laser printers
  • 15A 125V rating supports up to 1875W loads
  • 8ft length gives flexible placement for rack gear
  • Male-to-female design connects directly to PDU or wall outlet

Monoprice 135116 Heavy-Duty Power Cord

The Monoprice 135116 is an 8-foot computer power cord built with 14AWG conductors for high-current equipment. It connects a standard NEMA 5-15P wall plug to an IEC 60320 C15 inlet found on many servers and laser printers. Rated for 15 amps at 125 volts, it supports up to 1875 watts of continuous power. This cord targets system builders and IT staff who need a heavier gauge than typical desktop cables.

Thick 14AWG Build for Demanding Loads

The 14AWG wiring handles sustained high-power draw without the voltage drop seen on thinner cords. Its SJT jacket resists abrasion and heat in dense rack environments. The male-to-female orientation plugs directly from a wall outlet or PDU into a C14 inlet on the device. At 0.79 ounces the cable remains flexible enough for tight routing behind rack rails.

Replaces Standard C13 Cables in High-Draw Scenarios

Use this cord when a stock C13 lead is undersized for a large server chassis or high-wattage laser printer. The C15 connector tolerates higher inlet temperatures than a C13, making the upgrade worthwhile for equipment that runs hot. It is not suited for devices that only accept a C13 inlet or for low-power peripherals that do not need the extra current capacity.

Highlights

  • Thick 14AWG conductors handle high-power equipment demands
  • NEMA 5-15P to IEC 60320 C15 fits servers and laser printers
  • 15A 125V rating supports up to 1875W loads
  • 8ft length gives flexible placement for rack gear
  • Male-to-female design connects directly to PDU or wall outlet

Specifications

BrandMonoprice
Model135116
Length8 feet
Connector DetailMale-to-Female
SpecificationsVoltage: 125 volts; Current: 15 amps; Weight: 0.79 ounces; Connector: Male-to-Female; UL Listed: false

Questions about this item

What does the NEMA 5-15P to IEC 60320 C15 connection support in practice?

The 14AWG conductors handle up to 15 amps at 125 volts, delivering 1875 watts for servers and laser printers.

What clearance does the 8-foot length and C15 connector need to fit?

The C15 end has a notched profile that fits high-temperature inlets on rack gear; allow space for the 8-foot run and strain relief.

How is the Monoprice 135116 installed and what step is often missed?

Plug the NEMA 5-15P into a grounded 125 V outlet and seat the C15 fully into the device inlet until the notch locks; verify the connector clicks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.