Monoprice Inc.
Monoprice 135058 power extension cord 6 ft C19 to 5-20P 12AWG 20A 125V
Heavy-duty 12 AWG power extension cord connects C19 equipment to a NEMA 5-20P supply at 20 A, 125 V
- TypeOthers
- Connector Number2
- 12 AWG conductors handle 20 A for high-power server gear
- C19 to NEMA 5-20P connects rack equipment to UPS or PDU
- 6-foot length gives flexible placement in cabinets
- 125 V rating matches standard North American power circuits
- Heavy-duty SJT jacket resists wear in demanding environments
Server power extension cord
This Monoprice 135058 extension cord uses 12 AWG conductors rated for 20A at 125V. It connects equipment with an IEC 60320 C19 inlet to a NEMA 5-20P receptacle. The six-foot length suits rack or floor-mounted power distribution units.
Sustained high-current operation
The 12 AWG gauge handles continuous 20A loads without the voltage drop seen in thinner cords. SJT jacket material resists heat and abrasion during long-term use in dense server environments. It maintains stable delivery to critical network infrastructure.
Heavy-duty connectors and daily handling
Molded C19 and 5-20P ends withstand repeated insertion cycles in busy data centres. The locking C19 inlet prevents accidental disconnection from vibration or cable movement. Black SJT sheathing simplifies cable identification in colour-coded power chains.
Highlights
- 12 AWG conductors handle 20 A for high-power server gear
- C19 to NEMA 5-20P connects rack equipment to UPS or PDU
- 6-foot length gives flexible placement in cabinets
- 125 V rating matches standard North American power circuits
- Heavy-duty SJT jacket resists wear in demanding environments
Specifications
| Brand | Monoprice |
|---|---|
| Model | 135058 |
| Type | Others |
| Connector Number | 2 |
Questions about this item
Does the 12 AWG cable run warm when it carries 20 A continuously?
The 12 AWG conductors are rated for 20 A at 125 V, so normal full-load operation stays within safe temperature limits.
What inlet must my UPS or PDU provide to accept the NEMA 5-20P plug on this cord?
The cord ends in a NEMA 5-20P plug, which requires a matching 20 A 125 V receptacle on the UPS or power distribution unit.
Will the IEC 60320 C19 connector fit the C20 inlet on my older blade-server enclosure?
Yes, the C19 connector mates directly with a standard C20 inlet found on many blade-server enclosures and network switches.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115589BTC
In stock
