We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft cable with dual 8-pin and 12V-2x6 connectors

Monoprice 12VHPWR 600W PCIe 5.0 Dual 8-Pin to 12V-2x6 Cable for Corsair Type-4 PSUs - Black

SKU CH-VW3P-VB65V

Delivers 600W PCIe 5.0 power via 12V-2x6 connector using dual 8-pin Type-4 plugs and 16AWG tinned copper wire for Corsair Type-4 PSUs

  • TypeCable Connectors
  • ColorBlack
  • Length3 ft.
  • Connector Number1
  • Terminal GenderFemale to Female
  • SpecificationsTangle Free, RoHS, 50 amps, 12 volts, Atx, 16, 25, inches, B
  • Delivers stable 600W for PCIe 5.0 graphics cards via 12V-2x6 connector
  • Directly supports RTX 5070, 5080, 5090 and RX 7900, 9070 series GPUs without adapters
  • Exclusively compatible with Corsair Type-4 PSUs including RM, HX and AX series
  • Built with 16AWG 300V 10A tinned copper wire for lower resistance and heat
  • Dual 8-pin Type-4 connectors allow plug-and-play installation with high-quality materials

Monoprice 12VHPWR 600W Cable for Corsair Type-4 PSUs

This Monoprice cable connects a Corsair Type-4 power supply to PCIe 5.0 graphics cards using a 12V-2x6 connector. It delivers up to 600W of stable power for demanding GPUs. The 3 ft length uses 16AWG tinned copper wire rated for 300V and 10A. Dual 8-pin Type-4 plugs provide a direct link without extra adapters.

Compatible Corsair PSUs and unsupported systems

The cable fits Corsair RM, HX, and AX series units including the HX1200, HX1000, HX850, AX760i, AX860, AX860i, AX1200i, AX1500i, AX1600i, AX850 Titanium, and AX1000 Titanium models. Builders using non-Type-4 Corsair units or power supplies from other brands cannot use this cable. Systems requiring a single 8-pin or 16-pin native PSU connector also fall outside its design.

600W headroom for supported RTX and RX cards

The 600W rating covers RTX 5070, 5080, 5090 and RX 7900, RX 9070 series cards under typical gaming loads. The 50 amp, 12 volt specification handles transient spikes within the PCIe 5.0 limit. Cards drawing more than 600W or using a different power connector standard exceed the cable's capacity.

Highlights

  • Delivers stable 600W for PCIe 5.0 graphics cards via 12V-2x6 connector
  • Directly supports RTX 5070, 5080, 5090 and RX 7900, 9070 series GPUs without adapters
  • Exclusively compatible with Corsair Type-4 PSUs including RM, HX and AX series
  • Built with 16AWG 300V 10A tinned copper wire for lower resistance and heat
  • Dual 8-pin Type-4 connectors allow plug-and-play installation with high-quality materials

Specifications

BrandMonoprice
TypeCable Connectors
ColorBlack
Length3 ft.
Connector Number1
Terminal GenderFemale to Female
SpecificationsTangle Free, RoHS, 50 amps, 12 volts, Atx, 16, 25, inches, Black
FeaturesTangle Free
Disclaimer1

Questions about this item

Which Corsair Type-4 power supplies does the dual 8-pin connector fit?

It fits RM series, HX850, HX1000, HX1200, AX760i, AX850 Titanium, AX860, AX860i, AX1000 Titanium, AX1200i, AX1500i and AX1600i power supplies.

Will the 12V-2x6 connector work with my RTX 5080 and an older PCIe 4.0 card?

The 12V-2x6 connector is designed for PCIe 5.0 cards such as RTX 5070, 5080, 5090 and RX 7900, 9070; it is not intended for legacy PCIe 4.0 graphics cards.

How can I verify the 600 W cable is delivering stable power after installation?

Check that the 16 AWG tinned copper cable runs cool under load and that the GPU reports its full 600 W power limit in monitoring software without throttling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.