We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-foot power splitter cable with one C14 plug branching to two C13 connectors

Monoprice Inc.

Monoprice 127313 6ft 18AWG Power Splitter Cord 10A C14 to 2x C13

SKU CH-DTAC-1W43Q

Splits one C14 outlet into two C13 connectors for powering dual devices from a single source with a six-foot total length

  • TypeOthers
  • ColorBlack
  • Connector Number2
  • Connects two C13 devices to one C14 outlet
  • 6 ft total length with 2.7 ft branches
  • 18 AWG cable rated for up to 10 A
  • Supports 100–250 VAC for worldwide use
  • IEC 60320 C14 to dual IEC 60320 C13 connectors

Dual C13 Power Splitter

This six-foot splitter cable takes a single IEC 60320 C14 inlet and branches into two IEC 60320 C13 connectors rated for up to 10 amps at 100 to 250 VAC. It is built for IT technicians and office managers who need to power two computers, monitors or rack devices from one UPS or PDU port. The 18 AWG conductors and black PVC jacket meet standard indoor safety requirements. Model 127313 ships new with a lifetime warranty.

Build Integration

The splitter replaces two separate cords with one Y-shaped assembly that measures 6 feet overall and divides into 2.7 foot legs from the centre junction. This layout reduces cable clutter behind racks or desks and leaves adjacent outlets on a power strip free for other gear. No extra adapters are required; each C13 plug mates directly with a standard C14 appliance inlet on a PC, server or display.

Upgrade Context

The cord replaces a pair of individual C13-to-C14 leads when outlet density on a UPS, surge protector or wall socket is limited. The jump is worthwhile whenever two devices sit close enough to share the 2.7 foot reach from the split point. It does not increase available amperage beyond the 10 amp rating of the single C14 source, so loads that exceed that limit need a higher-capacity circuit instead.

Highlights

  • Connects two C13 devices to one C14 outlet
  • 6 ft total length with 2.7 ft branches
  • 18 AWG cable rated for up to 10 A
  • Supports 100–250 VAC for worldwide use
  • IEC 60320 C14 to dual IEC 60320 C13 connectors

Specifications

BrandMonoprice
Model127313
TypeOthers
ColorBlack
Connector Number2

Questions about this item

How much combined current can the C14 plug and 18 AWG wire safely carry?

The cord is rated for a maximum of 10 amps total across both C13 branches.

Does the cable get warm or stiff after hours of continuous 10 A load?

At full 10 amp rating the 18 AWG conductors will warm slightly but remain flexible during extended use.

Will my two IEC 60320 C14 inlets plug straight into the splitter?

Yes, each 2.7 foot branch ends in a C13 connector that mates with a standard C14 inlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.