Monoprice Inc.
Monoprice 124192 3.00 ft 14AWG Power Extension Cord C14 to C13 15A
A 3.00 ft black 14AWG IEC 60320 C14 to C13 extension cord rated 15A for linking monitors to PSUs or chaining cables
- TypeOthers
- ColorBlack
- Length3.00 ft.
- Connector Number2
- Connect monitor to PC power supply, freeing a wall outlet
- 00 ft 14 AWG cable rated for 15 A continuous current
- IEC 60320 C14 male to C13 female connectors for standard equipment
- Black jacket with two moulded connectors for durable everyday use
- Lifetime warranty from Monoprice backs every cable purchase
What it does
This three-foot extension cord carries a C14 plug on one end and a C13 socket on the other, letting you connect a monitor or peripheral directly to a computer power supply. It is built with 14 AWG conductors rated for 15 A and suits office or workstation setups where a single wall outlet must serve two devices.
Behaviour under load
The 14 AWG wiring handles the full 15 A rating continuously without overheating, so the cord remains stable during long rendering sessions or sustained server workloads. Voltage drop over the short 3.00 ft length is negligible, delivering clean power to the attached equipment.
Installation notes
Mate the male C14 plug into any standard C13 panel connector or cable end, then plug the female C13 side into the monitor or adapter; the connectors are keyed and only fit one way. The only common issue is attempting to force a C13 plug into a C14 inlet or vice-versa, which the keying prevents.
Highlights
- Connect monitor to PC power supply, freeing a wall outlet
- 00 ft 14 AWG cable rated for 15 A continuous current
- IEC 60320 C14 male to C13 female connectors for standard equipment
- Black jacket with two moulded connectors for durable everyday use
- Lifetime warranty from Monoprice backs every cable purchase
Specifications
| Brand | Monoprice |
|---|---|
| Model | 124192 |
| Type | Others |
| Color | Black |
| Length | 3.00 ft. |
| Connector Number | 2 |
Questions about this item
Does the 14AWG cord run warm or draw extra power when powering a monitor all day?
The 14AWG gauge is rated for 15A continuous load, so it handles typical monitor power without noticeable heat or loss.
What connectors must my existing cables already have for the C14-to-C13 cord to fit?
You need a female C13 receptacle on the power source side and a male C14 inlet on the monitor or its adapter.
Will the 3.00 ft 14AWG extension reach from an older ATX PSU C13 panel outlet to a monitor on the same desk?
At 3.00 ft it spans a typical desk depth, and the IEC 60320 C14-to-C13 ends match the legacy PSU panel and monitor inlets.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



