We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black BNC male-to-male coaxial cable, 0.9144 m, RG6 dual-shielded, 75-ohm connectors

Monoprice Inc.

Monoprice 116182 Viper Series HD-SDI RG6 BNC Cable 0.9144m Black

SKU CH-Z4S6-S2YCB

Transmits HD-SDI video with true 75-ohm BNC male connectors, dual copper-aluminium shielding and 18 AWG pure copper conductor over 0.9144 m

  • TypeOthers
  • Length0.9144
  • Connector Number2
  • Terminal GenderMale to Male
  • FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
  • Transfers HD-SDI video signals reliably
  • True 75-ohm BNC male connectors handle 3 Gbps bandwidth
  • Dual copper and aluminum shielding protects signal integrity
  • 18 AWG pure copper conductor ensures low loss
  • 100% sweep tested for consistent performance

Viper Series HD-SDI RG6 BNC Cable

This 0.9144m BNC cable carries HD-SDI video signals for broadcast, mobile production and HDTV upgrade projects. True 75-ohm male connectors on both ends support 3 Gbps bandwidth across an 18 AWG pure copper centre conductor. Dual copper and aluminium shielding protects the signal path.

Sustained signal integrity over 0.9144m

The RG6 digital-spec coaxial construction is 100% sweep tested to maintain 75-ohm impedance across the full length. Dual braided shields reject interference during continuous high-bitrate transmission. The 0.303 inch diameter jacket stays flexible for repeated routing in outside-broadcast trucks or facility racks.

Check your patch panel and device spacing

Verify both endpoints accept true 75-ohm BNC male plugs and that the 0.9144m reach suits your rack layout without tension. Confirm the gear operates at HD-SDI bit-rates within the 3 Gbps rating. This cable is not suited for runs that exceed its fixed length or for interfaces requiring a different impedance.

Highlights

  • Transfers HD-SDI video signals reliably
  • True 75-ohm BNC male connectors handle 3 Gbps bandwidth
  • Dual copper and aluminum shielding protects signal integrity
  • 18 AWG pure copper conductor ensures low loss
  • 100% sweep tested for consistent performance

Specifications

BrandMonoprice
Model116182
TypeOthers
Length0.9144
Connector Number2
Terminal GenderMale to Male
FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.

Questions about this item

Does the 18 AWG pure copper conductor generate noticeable heat when carrying 3 Gbps HD-SDI video all day?

The 18 AWG pure copper conductor is designed for low-loss signal transfer; passive coaxial cables do not produce measurable heat during continuous 3 Gbps HD-SDI operation.

What equipment must already have true 75-ohm BNC female ports for this male-to-male cable to connect?

Both source and destination devices — such as broadcast cameras, routers, monitors or HDTV upgrade gear — need 75-ohm BNC female jacks to accept the true 75-ohm BNC male connectors on each end.

Will the dual copper-and-aluminum shielding prevent interference when the cable runs alongside legacy analogue video lines?

The dual copper and aluminum braided shields provide high rejection of external noise, so the 3 Gbps HD-SDI signal stays clean even when routed near older analogue video cables.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.