Monoprice Inc.
Monoprice 114560 Pro Power Cable 10 Feet 16 AWG NEMA 5-15P to powerCON Stage Right
A 10-foot 16 AWG power cable with a NEMA 5-15P plug and a locking Neutrik powerCON connector rated IP65 for professional audio equipment
- TypeOthers
- Length3.048
- Connector Number2
- Features16AWG pure, bare copper conductors. Genuine Neutrik powerCON
- Pure copper conductors deliver clean power
- Genuine Neutrik powerCON locks with twist action
- Ground mates first for safer connection
- IP65 rating resists dust and water jets
- SJT jacket built for stage durability
Professional audio power cable
The Monoprice 114560 is a 10 foot power cable built for professional audio equipment. It connects a standard NEMA 5-15P plug to a genuine Neutrik powerCON NAC3FCA locking connector. The cable uses 16 AWG pure bare copper conductors inside an SJT-rated jacket for reliable current delivery.
Sustained load performance
The twist-lock latching system secures the connection against vibration or accidental pulling during extended use. The connector mates the ground contact before the neutral and line contacts, maintaining an electrically safe connection throughout continuous operation. Pure copper conductors minimise resistance over the full 3.048 metre length.
Thermals noise and power
The SJT-rated jacket provides mechanical durability and insulation suitable for stage environments. The powerCON connector carries an IP65 ingress protection rating, making it completely dust-tight and resistant to water jets at 4.3 psi for at least three minutes. This sealing protects the contacts from environmental contamination during normal use.
Highlights
- Pure copper conductors deliver clean power
- Genuine Neutrik powerCON locks with twist action
- Ground mates first for safer connection
- IP65 rating resists dust and water jets
- SJT jacket built for stage durability
Specifications
| Brand | Monoprice |
|---|---|
| Model | 114560 |
| Type | Others |
| Length | 3.048 |
| Connector Number | 2 |
| Features | 16AWG pure, bare copper conductors. Genuine Neutrik powerCON (NAC3FCA) connector. |
Questions about this item
Will the 16 AWG conductors and SJT-rated jacket run hot if I leave this powerCON cable powered all day?
The 16 AWG pure bare copper conductors and SJT-rated jacket are designed for continuous professional use; no heat or noise is produced by the cable itself.
My gear uses a Neutrik powerCON NAC3FCA inlet — does this cable mate directly or do I need an adapter?
This cable terminates in a genuine Neutrik powerCON NAC3FCA connector, so it plugs straight into any matching powerCON inlet without an adapter.
I still have older IEC C13 equipment — can I use this powerCON cable with those devices?
No, the powerCON NAC3FCA connector is not compatible with IEC 60320 C13/C14 inlets; a different cable is required for that equipment.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



