Monoprice Inc.
Monoprice 108794 24-inch 4-pin MOLEX to 4x 15-pin SATA power cable
A 24-inch cable converts one 4-pin MOLEX connector into four 15-pin SATA power connectors with 6-inch spacing for daisy-chaining drives
- TypeOthers
- ColorWhite
- Length2.00 ft.
- Cable Length2 ft.
- Connector Number2
- Converts a single Molex plug into four SATA power connectors
- 24-inch cable with 6-inch spacing suits multi-drive setups
- Net jacket keeps wiring tidy inside the case
- Supplies 5 V and 12 V only — verify drive needs no 3.3 V
- Monoprice lifetime warranty backs the adapter
What this cable does
This adapter converts a single 4-pin Molex power connector into four 15-pin SATA power connectors. It is designed for builders or upgraders who need to power multiple SATA drives from an older power supply that lacks enough native SATA leads.
Build and daily use
The 24-inch cable uses a net jacket to keep the four leads tidy inside a case. Each SATA connector is spaced about 6 inches apart so drives can be daisy-chained along the same power line without strain on the Molex source plug.
Critical voltage limitation
The Molex source supplies only 5 V and 12 V power, omitting the 3.3 V rail defined in the SATA specification. Drives that require 3.3 V will not operate from this adapter, so verify the drive label before connecting.
Highlights
- Converts a single Molex plug into four SATA power connectors
- 24-inch cable with 6-inch spacing suits multi-drive setups
- Net jacket keeps wiring tidy inside the case
- Supplies 5 V and 12 V only — verify drive needs no 3.3 V
- Monoprice lifetime warranty backs the adapter
Specifications
| Brand | Monoprice |
|---|---|
| Model | 108794 |
| Type | Others |
| Color | White |
| Length | 2.00 ft. |
| Cable Length | 2 ft. |
| Connector Number | 2 |
Questions about this item
Does the 4-pin Molex connector supply the 3.3 VDC that some SATA drives need?
The Molex connector provides only 5 and 12 VDC, so drives requiring 3.3 VDC will not work with this adapter.
How much clearance is needed for the 15-pin SATA connectors spaced along the 24-inch cable?
Each of the four 15-pin SATA connectors is spaced about 6 inches apart, so allow room for that daisy-chain layout.
What is the correct orientation when plugging the 4-pin Molex male end into the power supply?
Align the keyed 4-pin Molex male connector with the PSU's female socket; forcing it backwards can bend pins.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



