We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12-inch SATA 15-pin male to 4-pin Molex and 4-pin power cable

Monoprice Inc.

Monoprice 107642 SATA 15-pin Male to 4-pin Molex and 4-pin Power Cable 12 inch

SKU CH-Y53F-KGKWN

Converts a 15-pin SATA power connection into 4-pin Molex and 4-pin Mini connectors for legacy devices

  • TypeOthers
  • ColorBlack
  • Length1.00 ft.
  • Cable Length1 ft.
  • Connector Number2
  • Converts SATA power to Molex and floppy connectors
  • 12 inch length fits tight chassis builds
  • 15-pin male plug mates with modern PSU cables
  • Two output connectors power legacy drives simultaneously
  • Black jacket blends cleanly inside dark cases

SATA 15-pin to dual legacy power

This adapter cable converts a single SATA 15-pin power connector into a 4-pin Molex and a 4-pin Mini (Floppy) power connector. It is intended for builders who need to run older drives or accessories from a modern power supply. The 12 inch length keeps routing tidy inside standard desktop cases.

Capacity and headroom

The cable provides two legacy outputs from one SATA source, letting you power a pair of devices such as optical drives or fan controllers. It draws its current from the SATA rail, so total load must stay within that connector’s rating. It does not supply a SATA power plug for newer SSDs or hard drives.

Build fit and clearance

A 1.00 ft black cable reaches nearby drive bays without excess slack. The straight connectors require no special orientation, and the assembly needs no additional adapters or software. It frees up Molex leads on the power supply for other components while adding legacy support.

Highlights

  • Converts SATA power to Molex and floppy connectors
  • 12 inch length fits tight chassis builds
  • 15-pin male plug mates with modern PSU cables
  • Two output connectors power legacy drives simultaneously
  • Black jacket blends cleanly inside dark cases

Specifications

BrandMonoprice
Model107642
TypeOthers
ColorBlack
Length1.00 ft.
Cable Length1 ft.
Connector Number2

Questions about this item

Can the 15-pin SATA plug on this cable power a legacy 4-pin Molex drive and a 4-pin floppy device at the same time?

Yes, the 15-pin SATA male connector splits into one 4-pin Molex and one 4-pin Mini (Floppy) power connector so both legacy devices can draw power from a single SATA header.

How can I verify the cable is delivering power correctly after I connect it inside the case?

Power on the system and confirm that each attached legacy device spins up or lights up; the cable has no status LEDs so device activity is the only direct indication.

What connectors are included on the 12-inch cable and is any additional adapter required?

The cable provides a 15-pin SATA male plug, a 4-pin Molex female connector and a 4-pin Mini (Floppy) female connector; no extra adapters are needed for those interfaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.