We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black low-profile fixed TV wall mount bracket with mounting arms and hardware

Monoprice Inc.

Monoprice 106422 Essential Fixed TV Wall Mount 32-55" 99lbs VESA 400x200

SKU CH-M6VR-VG45C

Low-profile fixed bracket holds 32 to 55 inch screens up to 99 lbs with VESA 400x200 mounting

  • NameMonoprice Essential Fixed TV Wall Mount Bracket Low Profile
  • ColorBlack
  • Height1.70
  • Width6.60
  • Weight3.04
  • Low-profile design keeps the TV close to the wall
  • Fixed mount supports screens from 32 to 55 inches
  • Holds displays up to 99 lbs for secure installation
  • Compatible with VESA patterns up to 400x200 mm
  • Lightweight steel construction at 3.04 lbs simplifies mounting

Fixed low-profile mount for 32 to 55 inch displays

The Monoprice 106422 holds flat-panel televisions from 32 inches to 55 inches with a maximum load of 99 lbs. Its fixed design keeps the screen close to the wall for a clean, low-profile appearance. The black steel bracket mounts directly to wall studs using the included hardware. It suits living rooms, bedrooms or offices where a stationary viewing angle is preferred.

Passive cooling and silent operation

The mount contains no moving parts, fans or motors, so it adds zero noise to the room. Thermal performance is not a factor because the bracket does not generate heat or obstruct the television’s own ventilation. Power draw is non-existent, leaving the TV’s power requirements unchanged. The 3.04 lb bracket weight is included in the 99 lb capacity rating.

VESA 400x200 compatibility and space saving

The bracket accepts VESA hole patterns up to 400 mm wide by 200 mm high, covering most televisions in the supported size range. Mounting the display on the wall frees the top of cabinets or entertainment units for other equipment or decor. The 1.70 inch profile leaves minimal gap between the screen and wall surface. Buyers whose TV exceeds 99 lbs or requires a larger VESA pattern will need a different mount.

Highlights

  • Low-profile design keeps the TV close to the wall
  • Fixed mount supports screens from 32 to 55 inches
  • Holds displays up to 99 lbs for secure installation
  • Compatible with VESA patterns up to 400x200 mm
  • Lightweight steel construction at 3.04 lbs simplifies mounting

Specifications

BrandMonoprice
Model106422
Part Number106422
NameMonoprice Essential Fixed TV Wall Mount Bracket Low Profile For 32" To 55" TVs up to 99lbs, Max VESA 400x200
ColorBlack
Height1.70
Width6.60
Weight3.04

Questions about this item

How do I attach the 106422 bracket to my wall studs and what step do people often miss?

Secure the wall plate to wood studs using the supplied lag bolts, ensuring each bolt hits the centre of a stud; the step most often missed is verifying stud locations with a stud finder before drilling any pilot holes.

What hardware on the 106422 mount will need checking or replacement over time?

The four lag bolts anchoring the wall plate and the four M6 or M8 bolts fastening the TV brackets should be re-torqued after the first week and inspected annually for any loosening caused by thermal cycling.

At what point does the 1.70 inch low-profile gap become a limitation during sustained use?

The 1.70 inch clearance leaves almost no room for cable routing or connector backshells, so stiff HDMI or power cables pressing against the wall are the first limitation encountered in daily use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.