We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal desk monitor mount with adjustable tilt arm and VESA plate visible

Monoprice Inc.

Monoprice 105401 2-Way Adjustable Tilting Desk Mount Bracket Black 13-30in

SKU CH-R1ZT-1TSXZ

A desk clamp mount holds 13 to 30 inch monitors up to 33 lbs with VESA 50, 75, and 100 patterns, tilts 12 degrees, and extends 5.5 inches on a 0.87 to 2.25 inch thick surface

  • NameMonoprice 2-Way Adjustable Tilting Desk Mount Bracket for 13
  • Height6.00
  • Width10.00
  • Weight4.38
  • Fits 13 to 30 inch monitors up to 33 lbs
  • VESA 50x50, 75x75 and 100x100 patterns supported
  • 12 degree tilt adjustment for ergonomic viewing
  • Clamps to desks .87 to 2.25 inches thick
  • 5 inch swivel arm frees desk space

Desk Mount for 13-30 Inch Monitors

This adjustable tilting bracket fits monitors from 13 to 30 inches weighing up to 33 lbs. It supports VESA 50x50, 75x75, and 100x100 mounting patterns. The mount clamps to desk edges between .87 and 2.25 inches thick. It frees up desk surface while positioning the screen at eye level.

Fixed Position With Manual Tilt Adjustment

The bracket holds the monitor in a fixed position once installed with no moving fans or power draw. It offers 12 degrees of tilt adjustment for glare reduction. The 5.5 inch extension arm allows side-to-side swivel by hand. Operation is completely silent and requires no electricity.

Single Monitor Support Up To 33 Lbs

This bracket mounts exactly one display within the stated size and weight limits. It does not support dual-monitor configurations or screens heavier than 33 lbs. Buyers needing multiple screens or larger displays require a different mount type. Compatibility depends on matching VESA hole patterns and desk thickness range.

Highlights

  • Fits 13 to 30 inch monitors up to 33 lbs
  • VESA 50x50, 75x75 and 100x100 patterns supported
  • 12 degree tilt adjustment for ergonomic viewing
  • Clamps to desks .87 to 2.25 inches thick
  • 5 inch swivel arm frees desk space

Specifications

BrandMonoprice
Model105401
Part Number105401
NameMonoprice 2-Way Adjustable Tilting Desk Mount Bracket for 13~30in Monitors, Black
Height6.00
Width10.00
Weight4.38

Questions about this item

How do I clamp the Monoprice 105401 bracket to a desk between 0.87 inch and 2.25 inch thick?

Place the C-clamp base on the desk edge, tighten the thumb screw until the rubber pads grip firmly, then check that the arm sits level before mounting the monitor.

Which VESA screws and spacers come with the Monoprice 105401 for future panel swaps?

The kit includes M4 screws in three lengths plus nylon spacers to match 50x50, 75x75 and 100x100 patterns; keep them together for the next display.

At what tilt angle does the Monoprice 105401 stop when a 33 lb monitor is fully extended?

The mechanism locks at 12 degrees of tilt; beyond that the gas spring cannot counterbalance the weight and the arm will drift downward.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.