Monoprice 105296 1ft 16AWG Power Extension Cord 13A NEMA 5-15P to 5-15R Black
A 1 ft 16 AWG extension cord with NEMA 5-15P to 5-15R connectors rated for 13 A at 125 V in black
- Length1 feet
- Connector DetailHDMI to DVI
- SpecificationsVoltage: 125 volts; Current: 13 amps; Weight: 0.19 lb; UL Li
- Extends power reach by 1 ft with NEMA 5-15P to 5-15R connectors
- Handles 13 A at 125 V for standard US devices
- 16 AWG conductors rated for 13 A continuous load
- UL Listed for verified safety compliance
- Weighs only 0.19 lb for easy routing
One-foot reach for tight outlets
The Monoprice 105296 is a one-foot power extension cord built for desktop PCs, monitors and peripherals that sit close to a wall socket or power strip. Its NEMA 5-15P plug and matching 5-15R receptacle keep the connection grounded and polarised. The short length reduces cable clutter behind workstations or server racks. It ships new with a UL listing for safety compliance.
13-amp capacity on 16 AWG conductors
Three 16 AWG conductors carry up to 13 amps at 125 volts, enough for most single workstation power supplies and display bricks. The rating covers typical desktop loads without voltage drop across the one-foot run. It will not support high-current equipment such as dual-GPU systems or rackmount UPS units that exceed 13 amps. The cord is rated for indoor use only.
Cool, silent operation with minimal loss
Passive copper conductors generate no audible noise and add negligible heat inside a cabinet. Power loss across the one-foot length stays well below one watt at full 13-amp load. The PVC jacket remains flexible down to typical office temperatures. No active cooling or special ventilation is required for normal operation.
Highlights
- Extends power reach by 1 ft with NEMA 5-15P to 5-15R connectors
- Handles 13 A at 125 V for standard US devices
- 16 AWG conductors rated for 13 A continuous load
- UL Listed for verified safety compliance
- Weighs only 0.19 lb for easy routing
Specifications
| Brand | Monoprice |
|---|---|
| Model | 105296 |
| Length | 1 feet |
| Connector Detail | HDMI to DVI |
| Specifications | Voltage: 125 volts; Current: 13 amps; Weight: 0.19 lb; UL Listed: true |
Questions about this item
Will the NEMA 5-15P plug fit the standard three-prong outlet on my older power strip?
Yes, the cord uses a standard US NEMA 5-15P three-prong male plug that fits any matching NEMA 5-15R receptacle on existing power strips or wall outlets.
How can I confirm the cord is rated for the 13A load my equipment draws?
The UL Listed marking on the cable jacket and the 13A, 125V rating printed on the moulded connectors verify it is tested for that continuous current.
Does the single 1ft black cord come packaged alone, or do I need to order a power strip separately?
The box contains one 1ft 16AWG extension cord with NEMA 5-15P to NEMA 5-15R ends; any power strip or additional cables are sold separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



