We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black XLR male to RCA male audio cable with gold plated connectors and graphite housings

Monoprice Inc.

Monoprice 104776 XLR Male to RCA Male Cable 16AWG 0.9144m Gold Plated

SKU CH-WX2Y-VYD64

Connects balanced XLR sources to unbalanced RCA inputs with 16 AWG oxygen-free copper conductors and 97.5% braid shielding

  • TypeOthers
  • ColorBlack
  • Length0.9144
  • Connector Number2
  • FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
  • Gold-plated connectors resist corrosion for reliable signal transfer
  • 16AWG oxygen-free copper conductors deliver clean audio performance
  • 5% copper braid shielding blocks interference along full length
  • Twisted-pair design maintains signal integrity over 0.9144m run
  • Standard XLR-to-RCA pinout ensures broad equipment compatibility

XLR to RCA Balanced Converter

This cable converts a balanced XLR output to an unbalanced RCA input, or the reverse, for professional and home audio equipment. The standard pinout connects XLR pins 1 and 3 to the RCA shield and pin 2 to the tip. It is built for users who need a reliable link between mixing consoles, interfaces, and consumer gear.

16 AWG Oxygen-Free Copper Upgrade

Two 16 AWG oxygen-free copper conductors in a twisted-pair layout replace thinner, unshielded patch leads that pick up hum. Full-length copper braid with 97.5 Percent coverage suppresses interference far better than foil-only alternatives. The jump is worth it when cable runs sit near power supplies or lighting dimmers.

Check Connector Gender and Signal Level

Verify your source has a female XLR jack and your destination has a female RCA jack, or the opposite pairing, because this cable carries male plugs on both ends. Confirm the receiving device accepts an unbalanced signal, since the conversion always yields unbalanced output regardless of direction. Ensure the 0.9144 metre reach spans the gap without tension.

Highlights

  • Gold-plated connectors resist corrosion for reliable signal transfer
  • 16AWG oxygen-free copper conductors deliver clean audio performance
  • 5% copper braid shielding blocks interference along full length
  • Twisted-pair design maintains signal integrity over 0.9144m run
  • Standard XLR-to-RCA pinout ensures broad equipment compatibility

Specifications

BrandMonoprice
Model104776
TypeOthers
ColorBlack
Length0.9144
Connector Number2
FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.

Questions about this item

What length and wire gauge does the 104776 cable use for the XLR and RCA connectors?

The cable is .9144 metres long and uses 16 AWG stranded oxygen-free copper conductors in a twisted-pair arrangement.

How do I connect the XLR pins to the RCA plug without reversing the signal and ground?

Wire pin 2 of the XLR to the RCA tip and pins 1 and 3 to the RCA shield; the cable is pre-wired to this standard pinout.

Will the gold-plated connectors or 97.5 percent braid shield need periodic cleaning or replacement?

The gold plating resists corrosion and the 97.5 percent copper braid is built for the cable's lifetime; no scheduled maintenance is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.