We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black metal floor stands, height adjustable from 26.8 to 43.3 inches, hollow tubes for cable routing

Monoprice 103022 Satellite Speaker Floor Stands Black Pair 26.8-43.3in 5lb

SKU CH-ETZP-HNC98

Height-adjustable floor stands position satellite speakers at ear level, support 5 lb each, and hide cables inside hollow tubes

  • FinishBlack
  • MaterialsMetal
  • Length8.2 L x 22 W x 71.6 H centimeters
  • SpecificationMetal, Black, 43.3 inches, 5 pound, 43.3 L x 8.9 W x 3.2 H i
  • Sports TeamNO
  • FeatureFloor Stand, Metal
  • Position speakers for optimal sound with floor-standing design
  • Adjust height from 26.8 to 43.3 inches for ear-level listening
  • Mount via 1/4-Inch x 20 screw or keyhole slot
  • Black painted metal finish suits any decor
  • Each stand supports satellites up to 5 lbs

Monoprice 103022 Satellite Speaker Stands

This pair of black metal floor stands positions satellite speakers away from walls for improved bass response from rear ports. Each stand adjusts from 26.8 to 43.3 inches so tweeters sit at ear height while seated. Supplied brackets accept a standard 1/4-inch x 20 screw or keyhole mount. Hollow tubes conceal speaker cables for a tidy installation.

Capacity and headroom

Rated at 5 lb per stand, the pair comfortably supports typical compact satellites such as bookshelf or surround modules. The fixed base footprint of 8.9 by 3.2 inches provides stability on carpet or hard floors within that load limit. Heavier floor-standing cabinets or large studio monitors exceed the capacity and would require a different support solution.

Upgrade path

The stands replace improvised shelves, wall brackets or desktop placement that force speakers too close to boundaries or below ear level. The jump is worthwhile when rear-ported satellites sound boomy against a wall or when a listening seat demands precise tweeter alignment. They do not suit users needing speaker isolation platforms, ceiling mounts or support for speakers above 5 lb each.

Highlights

  • Position speakers for optimal sound with floor-standing design
  • Adjust height from 26.8 to 43.3 inches for ear-level listening
  • Mount via 1/4-Inch x 20 screw or keyhole slot
  • Black painted metal finish suits any decor
  • Each stand supports satellites up to 5 lbs

Specifications

BrandMonoprice
Model103022
Part Number103022
FinishBlack
MaterialsMetal
Length8.2 L x 22 W x 71.6 H centimeters
SpecificationMetal, Black, 43.3 inches, 5 pound, 43.3 L x 8.9 W x 3.2 H inches, 103022
Sports TeamNO
FeatureFloor Stand, Metal
Dimension43.3 in x 8.9 in x 3.2 in
Weight1 pounds

Questions about this item

Will my 5 lb satellite speakers stay stable on these stands at the 43.3 inch height?

Each stand is rated for a 5 lb weight capacity and the height adjusts from 26.8 to 43.3 inches, so a 5 lb speaker is within the supported limit at any height setting.

How can I confirm the stands are set up correctly for my speakers?

Verify the brackets are secured with the 1/4" x 20 mounting screw or seated in the keyhole mount, then adjust the column until the speaker sits at ear level when seated and cables run through the hollow tubes.

What mounting hardware is included and what must I supply?

The pair of stands includes brackets that accept a 1/4" x 20 screw or keyhole mount; you provide the speaker mounting screws if your speakers use the threaded insert.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.