We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mohawk

Mohawk LKV372A 60m 1080P HDMI Extender Cat6/6a/7 IR Remote

SKU CH-M7NG-NZRQ8

Extends 1080p HDMI up to 60 metres over a single Cat6/6a/7 cable with IR remote control included

  • Cable TypeRemote Control
  • 1080P HD video up to 60m over single Cat6 cable
  • Lossless transmission auto-adjusts for cable lengths 1-60m
  • Plug-and-play hardware design needs no drivers
  • IR remote control works across 20-60KHz frequency range
  • Includes IR emitter and receiver cables for source control

60m 1080P HDMI Extender with IR

This HDMI extender sends 1080P video, HD audio and 3D signals up to 60 metres over a single Cat6, Cat6a or Cat7 cable. It is built for installers and home users who need to bridge long distances between a source and a display without running an HDMI lead. The kit includes IR emitter and receiver cables for remote control of the source device from the display location.

Maximum reach over Cat6/6a/7

The extender guarantees lossless transmission up to 190 feet when the link cable follows the IEEE-568B wiring standard. For best results the supplier recommends a cable run of at least 45 feet. The unit automatically adjusts its parameters for any length between 1 and 60 metres to maintain a stable picture.

Passive hardware operation

The device uses a pure hardware design with no drivers or software required, so it runs silently and draws minimal power from the connected equipment. Heat output is negligible in normal use and there are no moving parts to generate noise. It supports IR frequencies from 20 to 60 kHz for reliable remote control passthrough.

Highlights

  • 1080P HD video up to 60m over single Cat6 cable
  • Lossless transmission auto-adjusts for cable lengths 1-60m
  • Plug-and-play hardware design needs no drivers
  • IR remote control works across 20-60KHz frequency range
  • Includes IR emitter and receiver cables for source control

Specifications

Cable TypeRemote Control

Questions about this item

What resolution does the 1080P extender actually deliver on the display?

The unit transmits full 1080P HD video with HD audio and 3D support, matching the source signal up to the rated distance.

Which cable standard limits the maximum reach of this extender?

It requires a single Cat6, Cat6a or Cat7 cable following the IEEE-568B wiring standard to achieve the full range.

How much Cat6 cable is needed to connect the transmitter and receiver units?

One Cat6, Cat6a or Cat7 cable between 15 m and 60 m links the TX and RX; shorter runs under 15 m are not recommended for best performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.