We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mobotron MS-526-SS car seat bolt mount with SS-104 stabilizer, aluminum tube and tray

Mobotron

Mobotron MS-526-SS Heavy-Duty Car Seat Bolt Mount with SS-104 Stabilizer

SKU CH-DJRR-QQXW1

A heavy-duty seat-bolt mount holds 10–17 inch laptops or tablets on a 10.6×7.5 inch deck with a 30 mm telescoping arm adjustable from 14 to 21 inches, supporting 26.4 lbs parked and 11 lbs in motion.

  • TypeAccessory
  • No-drill seat-bolt install in about 10 minutes
  • 30 mm aluminium tube adjusts 14 to 21 inches
  • Holds 10 to 17 inch devices up to 26.4 lbs parked
  • Quick-release levers set tray angle and arm position
  • SS-104 stabiliser adds 180 degree vertical pan

Vehicle mobile office mount

The Mobotron MS-526-SS bolts directly to a front seat rail without drilling and supports devices from ten to seventeen inches. A heavy-duty thirty millimetre aluminium tube telescopes from fourteen to twenty-one inches and carries up to twenty-six point four pounds while parked or eleven pounds while moving. Two quick-release levers and knob screws let the user set the deck angle and arm position in seconds.

SS-104 screen stabilizer effect

The bundled SS-104 stabilizer clamps to the mount arm and dampens vibration that would otherwise shake a laptop or tablet on rough roads. It keeps the screen steady enough for typing or video calls while the vehicle is in motion. No extra tools are required to attach or remove it.

Suits field professionals not permanent installs

Sales reps, realtors, truckers and travelling technicians who need a removable desk in a car, van or truck will benefit. Buyers who want a fixed console mount or a solution for vehicles without accessible seat bolts should look at alternative mounting bases such as the FM-101.

Highlights

  • No-drill seat-bolt install in about 10 minutes
  • 30 mm aluminium tube adjusts 14 to 21 inches
  • Holds 10 to 17 inch devices up to 26.4 lbs parked
  • Quick-release levers set tray angle and arm position
  • SS-104 stabiliser adds 180 degree vertical pan

Specifications

TypeAccessory

Questions about this item

What maintenance does the MS-526-SS mount need after months of daily use?

The aluminium tube and quick-release levers have no lubrication points; wipe dust from the sliding surfaces and check that the knob-screws stay tight.

What stops the MS-526-SS from holding a device steady during long drives?

The 11 lb in-motion weight limit is reached before the 26.4 lb parked limit, so heavier laptops may shift under vibration.

Does the SS-104 stabiliser add rattles or extra heat inside the cabin?

The SS-104 is a passive brace with no moving parts or electronics, so it adds no noise, no heat and draws no power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.