Mobil
Mobil 123018 Gear Oil SHC 634 460 1 qt Orange
Synthetic gear oil, ISO VG 460 and SAE 140, meets AGMA 9005 E02 and DIN 51517-3 CLP standards, pour point -38 °C
- Synthetic base oil resists breakdown up to 260 °C
- High viscosity index of 174 maintains film strength across temperatures
- Meets AGMA 9005 E02, DIN 51517-3 CLP and ISO 12925-1 CKD standards
- Low pour point of -38 °C ensures flow in cold conditions
- 1-quart bottle suits top-off and small-volume service needs
Mobil SHC 634 synthetic gear oil
This synthetic gear oil carries ISO viscosity grade 460 and SAE grade 140. It meets AGMA 9005 E02, DIN 51517-3 CLP and ISO 12925-1 CKD specifications. The fluid suits enclosed industrial gearboxes that require a synthetic lubricant with extreme-pressure performance.
Temperature range and viscosity stability
Maximum operating temperature reaches 260 degrees C while the pour point sits at -38 degrees C. A viscosity index of 174 indicates the oil resists thinning at high temperature and thickening in cold conditions. The flash point is 234 degrees C.
AGMA 7 extreme-pressure rating decides fit
The lubricant carries AGMA standard 7 with an extreme-pressure additive package. Gearboxes that specify a lower AGMA number or a non-EP fluid should not use this product. Verify the equipment manual calls for AGMA 7 EP before purchasing.
Highlights
- Synthetic base oil resists breakdown up to 260 °C
- High viscosity index of 174 maintains film strength across temperatures
- Meets AGMA 9005 E02, DIN 51517-3 CLP and ISO 12925-1 CKD standards
- Low pour point of -38 °C ensures flow in cold conditions
- 1-quart bottle suits top-off and small-volume service needs
Specifications
| Brand | MOBIL |
|---|
Questions about this item
Should I choose the ISO 460 or SAE 140 grade for my gearbox?
This bottle is both ISO VG 460 and SAE 140; they describe the same fluid. Use it when the equipment manual calls for either grade.
What does the 260 °C maximum operating temperature mean once the oil is in service?
It indicates the oil can withstand continuous bulk temperatures up to 260 °C without rapid degradation, allowing extended drain intervals in high-heat gearboxes.
Which AGMA and DIN standards does this SHC 634 meet, and what do they cap in practice?
It meets AGMA 9005 E02 (AGMA 7 EP), DIN 51517-3 CLP, ISO 12925-1 CKD, Siemens Flender-A33 and SEW IG/SG CLP HC, covering industrial extreme-pressure gear lubrication requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
