MIZISNR CS-6 6 Channel DJ Mixer 99 DSP 7-band EQ USB Bluetooth 48V Phantom Power
Six-channel DJ mixer with 99 DSP presets, 7-band EQ, USB and Bluetooth audio, plus 48 V phantom power and PAD switches per channel
- System Requirement110 volts_of_alternating_current, Corded Electric
- Specification6, XLR, Corded Electric, CS-6, MIZISNR, 2 year manufacturer.
- InputsXLR
- OutputsXLR
- Channel6
- Power SupplyCorded Electric
- Fine-tune audio with 3-band EQ and compressor per channel
- Shape sound using 99 DSP presets and 7-band graphic EQ
- Stream music wirelessly via built-in Bluetooth from mobile devices
- Play and record audio directly through USB flash drive
- Power condenser mics with 48V phantom power per channel
Six-channel DJ mixer for live and studio use
The MIZISNR CS-6 provides six channels with XLR inputs and outputs for microphones and line-level sources. Each channel includes a three-band EQ, compressor knob and dual AUX sends for flexible routing. It runs on 110 V corded electric power and is intended for PA, recording and live-streaming applications.
Suited to operators who need built-in effects
The 99 onboard DSP presets and 7-band graphic EQ let you shape tone without external processors. Bluetooth and USB support allow direct audio playback from phones or flash drives and USB recording for capture. Buyers who require more than six input channels or a different mains voltage should look at other models.
Phantom power and PAD switches change microphone
Independent 48 V phantom power per channel enables condenser microphones and DI boxes, while the PAD function attenuates high-output sources such as electric guitars. These per-channel controls remove the need for external pre-amp boxes or inline attenuators in typical live or studio setups.
Highlights
- Fine-tune audio with 3-band EQ and compressor per channel
- Shape sound using 99 DSP presets and 7-band graphic EQ
- Stream music wirelessly via built-in Bluetooth from mobile devices
- Play and record audio directly through USB flash drive
- Power condenser mics with 48V phantom power per channel
Specifications
| Brand | MIZISNR |
|---|---|
| Part Number | CS-6 |
| System Requirement | 110 volts_of_alternating_current, Corded Electric |
| Specification | 6, XLR, Corded Electric, CS-6, MIZISNR, 2 year manufacturer. |
| Inputs | XLR |
| Outputs | XLR |
| Channel | 6 |
| Power Supply | Corded Electric |
| Power Consumption | 110 volts_of_alternating_current, Corded Electric |
| Package Contains | 1 |
Questions about this item
What power supply must be available for the MIZISNR CS-6 to operate?
The mixer requires a 110 volt AC mains supply and ships with a corded electric power lead, so a standard wall outlet is all that is needed.
Will the 48 V phantom power on the CS-6 affect older dynamic microphones connected to the same XLR inputs?
Each channel has its own 48 V phantom power switch, so you can leave it off for dynamic mics while enabling it only for condenser microphones that require it.
How can I confirm the 99 DSP effects and 7-band EQ are active after connecting the mixer?
Select a DSP preset and watch the display change, then adjust the 7-band graphic EQ sliders and listen for the corresponding tonal shifts on the main output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



