Mitsubishi
Mitsubishi XD530E projector lamp 280W Osram P-VIP
A 280 W replacement lamp module with an Osram P-VIP bulb, rated for 2,000 hours normal or 3,000 hours economy use
- TypeProjector Lamp
- Wattage280W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with genuine Osram P-VIP bulb
- 280W output matches original projector specifications
- Up to 3000 hours lamp life in economy mode
- Manufactured to ISO 9001 quality standards
- OEM replacement for Mitsubishi VLT-XD520LP projectors
Replacement lamp for Mitsubishi projectors
The Mitsubishi XD530E projector lamp is a new 280W module supplied with an Osram P-VIP bulb already fitted in its housing. It matches the VLT-XD520LP part number and is built to ISO9001 quality checks for beam performance, ignition, voltage and run-time. The unit is ready for direct installation without extra assembly.
Lamp life and thermal behaviour
In normal mode the lamp is rated for 2,000 hours and in economy mode for 3,000 hours. The 280W Osram P-VIP bulb determines the heat output and cooling demand of the projector during operation. No separate fan or radiator specifications are provided for the module itself.
Deciding specification: 280W Osram P-VIP bulb
The critical figure is the 280W Osram P-VIP bulb type, which must match the projector’s original lamp requirement. Buyers whose projectors call for a different wattage or bulb technology cannot use this module. Compatibility with any other Mitsubishi model or third-party projector is not confirmed by the supplied data.
Highlights
- Ready-to-install module with genuine Osram P-VIP bulb
- 280W output matches original projector specifications
- Up to 3000 hours lamp life in economy mode
- Manufactured to ISO 9001 quality standards
- OEM replacement for Mitsubishi VLT-XD520LP projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 280W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How do I install the VLT-XD520LP lamp module and what step do people often miss?
The module arrives as a fully assembled bulb and housing. Power off and unplug the projector, let it cool completely, then remove the old lamp cage. Insert the new module until it seats firmly, secure the retaining screws, and reset the lamp-hour counter in the projector menu — skipping the reset is the step most people forget.
What maintenance or replacement will this 280 W Osram P-VIP lamp need later?
The lamp itself is the only consumable. Expect 2,000 hours in Normal mode or 3,000 hours in Economy mode before brightness drops enough to warrant a new module. Keep the projector’s air filters clean so the lamp runs at proper temperature and reaches its rated life.
What limit appears first during sustained use of this 280 W lamp?
The 2,000-hour Normal-mode rating (3,000 hours in Economy) is the first hard limit — after that the lamp will dim noticeably and may fail to ignite. Thermal protection will also shut the projector down if dust-clogged filters prevent adequate cooling, so filter cleaning is the practical limit that can arrive sooner.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



