We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mitsubishi DLP replacement lamp module in black housing

Mitsubishi

Mitsubishi WD-82842 dlp replacement lamp 180W 1.0 E22H UHP

SKU CH-52SH-FJFRT

OEM lamp and housing with original 180 W 1.0 E22H UHP bulb rated for 6,000 hours

  • TypeProject Lamp
  • Weight0.9990
  • OEM housing with original Philips 180W 1.0 E22H UHP bulb
  • 6 000 hour rated lamp life for extended viewing
  • Pre-assembled lamp and housing for direct installation
  • New condition unit weighing 0.9990 kg
  • Compatible with Mitsubishi WD-82842 DLP TV models

Mitsubishi WD-82842 lamp replacement

This replacement lamp and housing assembly is designed for the Mitsubishi WD-82842 rear-projection television. It arrives as a complete unit with an original Philips 180W 1.0 E22H UHP bulb already installed. The module is supplied new and rated for approximately 6,000 hours of operation. It restores brightness and colour performance without requiring separate bulb handling.

OEM housing with Philips bulb inside

The unit uses an original equipment manufacturer housing that matches the factory mechanical and optical alignment. A genuine Philips ultra-high-pressure lamp is pre-fitted, eliminating the risk of mis-seating a bare bulb. The assembled weight is 0.9990 kg, and the housing connects directly to the TV's existing lamp door and power interface. No additional tools or adapters are required for installation.

Restores factory brightness after lamp aging

This assembly replaces a dimmed or expired original lamp in the WD-82842 set. The upgrade is worthwhile when the TV's picture has become noticeably darker or when the lamp-hour counter approaches the rated 6,000-hour limit. It is not intended for models other than the WD-82842, nor for users seeking higher light output than the original 180W specification provides.

Highlights

  • OEM housing with original Philips 180W 1.0 E22H UHP bulb
  • 6 000 hour rated lamp life for extended viewing
  • Pre-assembled lamp and housing for direct installation
  • New condition unit weighing 0.9990 kg
  • Compatible with Mitsubishi WD-82842 DLP TV models

Specifications

BrandJaspertronics
ModelWD-82842-LAMP-UHP
Part NumberWD-82842-LAMP-UHP
TypeProject Lamp
Weight0.9990

Questions about this item

What does the 180W 1.0 E22H UHP specification mean for brightness and lamp life?

The 180-watt Philips UHP bulb is rated for 6,000 hours of use in the Mitsubishi WD-82842, delivering original brightness and colour performance for the TV's light engine.

Will the WD-82842-LAMP-UHP housing fit my Mitsubishi WD-82842 without modification?

Yes, the complete lamp-and-housing assembly is built to the exact dimensions of the original Mitsubishi WD-82842 module, so it slides into the TV's lamp compartment and secures with the existing screws.

How do I install the replacement lamp in my WD-82842, and what step do people often miss?

Power off and unplug the TV, let it cool, remove the lamp door, swap the old housing for the new Jaspertronics unit, tighten the retaining screws, replace the door, then reset the lamp-hour counter in the on-screen menu — the step most owners forget.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.