Mitsubishi
Mitsubishi WD-73838 DLP replacement lamp PHI334 160/180W 6000h
A DLP replacement lamp with a Philips PHI334 bulb rated at 160/180 W and 6000 hours for Mitsubishi WD-73838 TVs
- TypeProject Lamp
- Weight0.9990
- Ready to install with Philips UHP bulb inside
- 6000 hour rated lamp life for extended use
- 160/180 watt dual power operation supported
- Pre-assembled housing fits WD-73838 models directly
- New OEM replacement weighing .9990 kg
Compatible Mitsubishi Models
This replacement lamp module fits Mitsubishi WD-73838 and WD73838 rear-projection televisions. It arrives as a complete lamp-and-housing assembly so no separate cage handling is required. The unit is supplied new and ready for immediate installation.
Philips UHP Bulb Performance
The lamp uses an original Philips UHP bulb rated at 160/180 W and 6000 hours of service life. Output remains stable across the rated period rather than fading after a brief initial peak. Consistent brightness supports everyday viewing without frequent readjustment.
Thermal and Power Characteristics
Normal operation draws either 160 W or 180 W depending on the television’s lamp-mode setting. The design dissipates heat through the TV’s existing cooling path so no additional ventilation is needed. Acoustic output stays at the level the original lamp produced.
Highlights
- Ready to install with Philips UHP bulb inside
- 6000 hour rated lamp life for extended use
- 160/180 watt dual power operation supported
- Pre-assembled housing fits WD-73838 models directly
- New OEM replacement weighing .9990 kg
Specifications
| Brand | Jaspertronics |
|---|---|
| Model | WD-73838-LAMP-UHP |
| Part Number | WD-73838-LAMP-UHP |
| Type | Project Lamp |
| Weight | 0.9990 |
Questions about this item
Does the 160/180 watt PHI334 lamp run hotter or louder than the original after hours of use?
The lamp draws the same 160 to 180 watts as the original Philips UHP bulb, so heat output and fan noise inside the Mitsubishi WD-73838 stay unchanged.
Must I already own the Mitsubishi WD-73838 TV for this housing to fit?
Yes — the lamp and housing are built specifically for the WD-73838 chassis and will not install in any other model.
Will the 6000 hour PHI334 lamp work properly with the older ballast and colour wheel already in my WD-73838?
The lamp uses the original Philips UHP bulb specified for the WD-73838, so it strikes and runs correctly with the existing ballast and colour wheel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



