We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A rectangular lamp module in a black plastic housing with a silver connector and clear glass bulb visible

Mitsubishi

Mitsubishi WD-73640 DLP replacement lamp 180W 1.0 E22H UHP

SKU CH-4ZGZ-ZBBF9

Genuine 180 W 1.0 E22H UHP lamp in a ready-to-fit housing for Mitsubishi WD-73640 DLP sets

  • TypeProject Lamp
  • Weight0.9990
  • OEM lamp and housing fits Mitsubishi WD-73640 TV
  • Original Philips 180W 1.0 E22H UHP bulb inside
  • Rated for 6,000 hours of projection time
  • New condition with one-year manufacturer warranty
  • Weighs 0.9990 kg for easy installation

Mitsubishi WD-73640 DLP Lamp

This replacement lamp and housing assembly is built for the Mitsubishi WD-73640 rear-projection television. It contains an original Philips 180W 1.0 E22H UHP bulb rated for approximately 6000 hours of use. The unit ships new and ready to install, restoring the display's original brightness and colour performance for home-theatre viewers who need a direct-fit solution.

Replaces aged OEM lamp module

It swaps out the factory-installed lamp and housing when brightness fades, colour shifts or the TV signals a lamp-end warning. The jump is worth it when the existing module has reached or exceeded its rated hours and the picture no longer meets viewing expectations. Buyers who need a higher-wattage or different-form-factor light source will not be served by this specific 180W E22H unit.

Simple housing swap with reset

Installation consists of opening the lamp door, removing the old housing and sliding the new assembly into place until it seats firmly. The most common issue is forgetting to reset the lamp-hour counter in the TV menu, which leaves the replacement warning active. Another frequent oversight is leaving the lamp-door safety switch unlatched, preventing the set from powering on.

Highlights

  • OEM lamp and housing fits Mitsubishi WD-73640 TV
  • Original Philips 180W 1.0 E22H UHP bulb inside
  • Rated for 6,000 hours of projection time
  • New condition with one-year manufacturer warranty
  • Weighs 0.9990 kg for easy installation

Specifications

BrandJaspertronics
ModelWD-73640-LAMP-UHP
Part NumberWD-73640-LAMP-UHP
TypeProject Lamp
Weight0.9990

Questions about this item

What housing size does the Mitsubishi WD-73640 replacement lamp assembly require?

The lamp ships as a complete lamp-and-housing unit coded WD-73640-LAMP-UHP, designed to slide directly into the WD-73640 TV without separate cage installation.

Which step do installers often miss when fitting the 180W 1.0 E22H UHP lamp module?

After seating the housing, the TV's lamp-hour counter must be reset through the on-screen menu; otherwise the set will shut down prematurely thinking the old lamp is still in use.

When should the Philips UHP bulb inside this module be replaced?

The lamp is rated for 6,000 hours of operation; plan replacement when brightness drops noticeably or the TV's lamp indicator illuminates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.