Mitsubishi
Mitsubishi SD206U Projector Lamp 205W VLT-XD206LP
A 205W UHP projector lamp module with bulb and housing, rated for 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage205W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with 205W Ushio UHP bulb
- Up to 3000 hours lamp life in Economy mode
- 2000 hours lamp life in Normal mode
- Manufactured to ISO 9001 quality standards
- OEM replacement for Mitsubishi VLT-XD206LP projectors
Replacement lamp for Mitsubishi SD206U
The module combines a new Ushio UHP 205W bulb with a complete housing so it fits the Mitsubishi SD206U projector without extra assembly. It is intended for schools, offices and home users who need a direct replacement when the original lamp reaches end of life. The lamp is new and ready to install.
Upgrade from a dim or ageing lamp
When brightness drops or the projector warns that lamp hours are exhausted, this module restores rated output for another 2,000 hours in normal mode or 3,000 hours in economy mode. The jump is worth it if image quality has faded or the unit shuts down due to lamp timer limits. No other projector models are supported.
Simple housing swap
Installation requires opening the projector lamp door, removing the old housing and inserting the new one until it seats firmly. Common issues are forgetting to reset the lamp timer in the menu, which leaves the warning active, or not securing the door latch, which prevents the projector from powering on.
Highlights
- Ready-to-install module with 205W Ushio UHP bulb
- Up to 3000 hours lamp life in Economy mode
- 2000 hours lamp life in Normal mode
- Manufactured to ISO 9001 quality standards
- OEM replacement for Mitsubishi VLT-XD206LP projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 205W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Mitsubishi projector models accept the VLT-XD206LP lamp module?
The VLT-XD206LP lamp module is designed for the Mitsubishi SD206U projector.
What is the correct procedure to install the VLT-XD206LP lamp module?
Power off the projector, allow it to cool completely, remove the lamp cover, release the retaining screws, pull out the old module, insert the new VLT-XD206LP module, secure the screws, replace the cover, then reset the lamp timer in the menu.
When should the VLT-XD206LP lamp be replaced based on its rated life?
The 205W UHP lamp is rated for 2000 hours in Normal mode and 3000 hours in Economy mode; replace it when the projector's lamp-hour counter approaches those limits or brightness drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



