Mitsubishi
Mitsubishi SD110U Projector Lamp 200W
A 200 W projector lamp module with a pre-assembled bulb and housing, rated for 2,000 hours in normal mode or 4,000 hours in economy mode
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 4,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 200W UHP lamp matches original projector specification
- 2,000 hours normal or 4,000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Compatible with Mitsubishi SD110U projector model
Ready-to-install lamp module
The Mitsubishi SD110U lamp module arrives as a complete unit with a 200W UHP bulb already seated in its housing. No separate bulb handling or alignment is required, so the projector can be back in service minutes after the old module is removed. The part is manufactured to ISO9001 quality standards and supplied new.
For SD110U owners needing a direct replacement
This module fits the Mitsubishi SD110U projector and is built to the original 200W specification. Buyers who need a different wattage, a bare bulb without housing, or a lamp for another projector model should look elsewhere.
Rated life of 2,000 hours normal
The lamp delivers 2,000 hours in normal mode and up to 4,000 hours when the projector runs in economy mode. That figure is the primary measure of how long the module will last before another replacement is needed.
Highlights
- Ready to install with pre-assembled bulb and housing
- 200W UHP lamp matches original projector specification
- 2,000 hours normal or 4,000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Compatible with Mitsubishi SD110U projector model
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
What wattage does the Mitsubishi SD110U lamp draw, and how many hours can I expect in normal and economy modes?
The lamp is rated at 200W and provides approximately 2,000 hours in normal mode or 4,000 hours in economy mode.
Does the lamp arrive as a complete housing assembly ready to slot into the Mitsubishi projector?
Yes, it ships as a fully assembled bulb and housing module so you can install it without any extra assembly.
How is the lamp installed, and what step do people often miss?
Power off and unplug the projector, let it cool completely, then remove the lamp cover, swap the module, replace the cover, and reset the lamp timer in the menu — skipping the timer reset is the common mistake.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Lexmark X748H4MG magenta toner cartridge 10000 pages
- Magenta
- Lexmark X748 Printer



