We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Mitsubishi LX-5280 projector lamp module with 200W Ushio NSH bulb in housing

Mitsubishi

Mitsubishi LX-5280 Projector Lamp 200W Ushio NSH

SKU CH-H932-FXM85

A 200 W replacement lamp module with Ushio NSH bulb and housing, ready to install in Mitsubishi projectors and rated for 2,000 to 5,000 hours

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 (Normal) - 5,000 (Economy) Hrs.
  • Ready-to-install module with genuine Ushio NSH 200W bulb
  • 2,000 hours normal mode or 5,000 hours economy mode
  • OEM-spec assembly manufactured to ISO 9001 quality standards
  • Compatible with Mitsubishi VLT-XL550LP projector models
  • New condition ensures full rated performance from first use

Direct Replacement Lamp

The Mitsubishi LX-5280 projector lamp module arrives as a fully assembled 200W Ushio NSH bulb inside its housing. It matches the original VLT-XL550LP specification for immediate installation in compatible Mitsubishi projectors. The lamp delivers up to 2000 hours in normal mode or 5000 hours in economy mode. This new unit restores factory brightness without modification.

Thermal and Power Profile

The 200W NSH lamp operates within the projector's original thermal design, drawing the same power as the factory module. Cooling requirements and acoustic output remain identical to the OEM lamp it replaces. ISO9001 manufacturing controls verify ignition voltage, beam performance and run-time consistency. Each unit is tested before shipment to confirm stable operation.

When the Swap Pays Off

Replace the lamp when image brightness drops, colour fidelity fades or the projector signals end-of-life. The jump is worth it when the existing module has reached or exceeded its rated hours and a genuine OEM-specification unit is preferred over third-party alternatives. This module suits owners who want the original manufacturer's bulb technology. It is not for users needing higher wattage or a different lamp type.

Highlights

  • Ready-to-install module with genuine Ushio NSH 200W bulb
  • 2,000 hours normal mode or 5,000 hours economy mode
  • OEM-spec assembly manufactured to ISO 9001 quality standards
  • Compatible with Mitsubishi VLT-XL550LP projector models
  • New condition ensures full rated performance from first use

Specifications

TypeProjector Lamp
Wattage200W
Lamp Life2,000 (Normal) - 5,000 (Economy) Hrs.

Questions about this item

How do I install the Mitsubishi LX-5280 lamp module and which step is often missed?

Power off and unplug the projector, remove the lamp cover, release the retaining screws, slide out the old module, insert the new LX-5280 housing until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.

What maintenance will the 200W Ushio NSH bulb need during its 2000 to 5000 hour life?

No bulb maintenance is required; the module is sealed. When brightness drops or the projector signals end of life, replace the entire LX-5280 lamp assembly.

What limit appears first when the projector runs continuously in normal mode?

The 2000-hour rated lamp life in normal mode is the first limit; after this the bulb may dim or fail to ignite, requiring a full module swap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.