Mitsubishi
Mitsubishi LVP-XD105 genuine compatible projector lamp 160W
A 160 W projector lamp module with a 3,000 to 4,000 hour rated life for Mitsubishi LVP-XD105 models
- TypeProjector Lamp
- Wattage160W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- 160 W NSH bulb delivers bright output for clear projection
- 3,000 hours normal mode extends time between replacements
- 4,000 hours economy mode further reduces lamp changes
- Pre-assembled housing enables quick tool-free installation
- ISO 9001 manufacturing ensures consistent quality and reliability
Genuine Compatible LVP-XD105 Lamp
The Mitsubishi LVP-XD105 genuine compatible lamp is a 160W replacement module that ships with a new NSH bulb inside a complete housing. It is built for owners of Mitsubishi projectors that use the VLT-SD105LP part who need a ready-to-install light source.
Replaces the original projector lamp module
This unit takes the place of the factory lamp when brightness drops or the hour counter reaches its limit. The jump is worth it when the existing lamp has reached the end of its rated life or when image quality has faded beyond what cleaning can restore.
Rated for 3,000 hours normal or 4,000 hours economy
Under continuous operation the lamp delivers up to 3,000 hours in normal mode and up to 4,000 hours in economy mode. Each unit is manufactured to ISO 9001 standards and tested for beam performance, ignition, voltage, connections and run-time before it leaves the supplier.
Highlights
- 160 W NSH bulb delivers bright output for clear projection
- 3,000 hours normal mode extends time between replacements
- 4,000 hours economy mode further reduces lamp changes
- Pre-assembled housing enables quick tool-free installation
- ISO 9001 manufacturing ensures consistent quality and reliability
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 160W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Does the LVP-XD105 lamp module include the housing so I can install it directly?
Yes, the module arrives as a fully assembled 160W NSH bulb inside its housing, ready to fit without extra parts.
What is the correct way to seat the lamp, and what step do installers often skip?
Power off and unplug the projector, let it cool, remove the old module, insert the new one until the connector clicks, then reset the lamp-hour counter in the menu — skipping the reset is the common error.
When will the 160W NSH bulb need replacement, and how do the two modes affect that?
Expect about 3,000 hours in normal mode or 4,000 hours in economy mode before the lamp reaches end of life and requires a new module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



