Mitsubishi
Mitsubishi HL650U 261W projector lamp
Replacement lamp module with 261W Ushio NSH bulb and housing, rated 2,000 normal or 5,000 economy hours
- TypeProjector Lamp
- Wattage261W
- Lamp Life2,000 (Normal) - 5,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- Bright 261W NSH bulb delivers clear projection
- Up to 5000 hours life in economy mode
- 2000 hours normal mode suits daily use
- Built to ISO 9001 quality standards
Ready-to-install lamp module
The Mitsubishi HL650U is a new 261 W replacement lamp module that ships with a Ushio NSH bulb already seated in its housing. It matches the VLT-XL650LP part number used in compatible Mitsubishi projectors and requires no separate bulb handling during installation.
Restores original brightness
This module replaces a lamp that has reached the end of its rated life or one that has dimmed noticeably over time. The jump is worth it when the projector image becomes too dark for comfortable viewing in your normal environment or when the lamp-hour counter approaches the rated limit.
Rated for 2 000 to 5 000 hours
In normal mode the lamp is rated for 2 000 hours of operation; switching to economy mode extends the rating to 5 000 hours. The module comfortably handles daily classroom or meeting-room use, while very high-duty cycles such as continuous digital-signage playback will exhaust the rated life more quickly.
Highlights
- Ready to install with pre-assembled housing
- Bright 261W NSH bulb delivers clear projection
- Up to 5000 hours life in economy mode
- 2000 hours normal mode suits daily use
- Built to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 261W |
| Lamp Life | 2,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Does this 261W lamp module include the housing so it fits my Mitsubishi HL650U without extra parts?
Yes, the module ships as a fully assembled bulb and housing ready to slot into the Mitsubishi HL650U projector.
What is the installation procedure and which step do users most often miss?
Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the old module out, insert the new one until it clicks, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most often forgotten.
When will the Ushio NSH 261W bulb need replacement and how do I know?
Expect roughly 2,000 hours in normal mode or 5,000 hours in economy mode; the projector will warn you when the lamp-hour counter reaches its limit and image brightness will drop noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



