Mitsubishi
Mitsubishi HC1500 VLT-HC910LP 200W projector lamp
200 W replacement lamp module with Ushio UHP bulb and housing, rated for 2,000 to 3,000 hours
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with genuine Ushio 200W bulb
- Up to 3000 hours runtime in economy mode
- 2000 hours typical life at normal brightness
- OEM-grade assembly built to ISO 9001 quality checks
- Direct-fit replacement for Mitsubishi HC1500 projectors
Ready-to-install 200 W lamp module
The Mitsubishi HC1500 replacement lamp arrives as a complete assembly with a new Ushio UHP 200 W bulb already seated in its housing. No separate bulb handling or alignment is required, so the module drops straight into the projector for immediate use.
Built to ISO 9001 quality checks
Each unit is tested for beam performance, ignition voltage, electrical connections and run-time before it leaves the factory. The supplied housing ensures the lamp seats securely in the projector’s lamp compartment and maintains the correct optical alignment throughout its service life.
Restores original brightness after 2 000–3 000 hours
When the existing lamp reaches the end of its rated 2 000-hour normal or 3 000-hour economy cycle, this module returns the projector to factory-spec output. It is not suited for users who need a higher-wattage alternative or a bare bulb without housing.
Highlights
- Ready-to-install module with genuine Ushio 200W bulb
- Up to 3000 hours runtime in economy mode
- 2000 hours typical life at normal brightness
- OEM-grade assembly built to ISO 9001 quality checks
- Direct-fit replacement for Mitsubishi HC1500 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Mitsubishi projector models does the VLT-HC910LP lamp module fit?
The VLT-HC910LP is designed for the Mitsubishi HC1500 projector and ships as a complete bulb-and-housing assembly for direct replacement.
What clearance or mounting points are required to install this lamp module?
The lamp module uses the original housing dimensions and connector layout, so it fits the HC1500 lamp compartment without adapters or extra brackets.
What is the correct installation sequence for the VLT-HC910LP, and which step is most often missed?
Power off and unplug the projector, let it cool, remove the lamp cover, release the retaining screws, slide the old module out, insert the new VLT-HC910LP until the connector seats, secure the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most users forget.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



