Mitsubishi
Mitsubishi GW-8500 projector lamp 330W
330 W replacement lamp module with Philips UHB bulb and housing, rated for 2 000 hours normal or 4 000 hours economy mode
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 4,000 (Economy) Hrs.
- Ready-to-install module with 330 W Philips UHB bulb
- 2 000 hours normal / 4 000 hours economy lamp life
- Fits Mitsubishi projectors using VLT-XD8000LP / GW-8500
- ISO 9001 manufacturing with beam, ignition and run-time checks
- New condition, genuine OEM bulb and housing included
Ready-to-install lamp module
The Mitsubishi GW-8500 is a complete projector lamp assembly that ships with a new Philips UHB 330W bulb already seated in its housing. It is intended for owners of compatible Mitsubishi projectors who need a direct replacement without separate bulb handling.
330 watt UHB bulb
The lamp uses a 330W ultra-high-pressure mercury bulb, and the wattage must match the projector’s original specification for correct ignition and brightness. A different wattage will not strike or will damage the power supply.
Rated 2 000 to 4 000 hours
In normal mode the lamp is rated for 2 000 hours of operation, while economy mode extends the rating to 4 000 hours. Heavy daily use in normal mode will reach the limit sooner, and brightness declines gradually as the hours accumulate.
Highlights
- Ready-to-install module with 330 W Philips UHB bulb
- 2 000 hours normal / 4 000 hours economy lamp life
- Fits Mitsubishi projectors using VLT-XD8000LP / GW-8500
- ISO 9001 manufacturing with beam, ignition and run-time checks
- New condition, genuine OEM bulb and housing included
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
How bright will the 330W UHB bulb actually be once it is installed in my Mitsubishi projector?
The lamp delivers the full 330 watts of UHB output the projector was designed for, restoring original brightness and colour balance without any loss compared with the factory module.
Does the GW-8500 use a proprietary connector or a standard lamp interface that limits compatibility?
It is built as a direct replacement module for the Mitsubishi VLT-XD8000LP, so the housing and connector match the projector exactly and no adapter is required.
What physical space and mounting points does the assembled lamp module need inside the projector?
The complete bulb-and-housing unit fits the original lamp cavity and secures with the projector's existing screws, requiring no extra brackets or modifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



