Mist
Mist MSC384 Replacement Shower Filter Cartridge 3 Pack
Three-pack of eight-stage shower cartridges removes chlorine, odour, rust and microscopic particles at two gallons per minute for up to 3,400 gallons
- TypeFiltration Systems
- Color/FinishSilver
- 8-stage filtration removes chlorine, odour, rust and microscopic particles
- Maintains normal shower pressure with a 2 GPM flow rate
- Each cartridge lasts up to 3,400 gallons or 3-4 months
- Simple DIY replacement fits the MSS084 shower filter
- Operates reliably between 40-120 °F and 20-125 psi
Replacement Cartridge for Mist MSS084
This three-pack supplies direct-fit replacement cartridges for the Mist MSS084 shower filter. Each cartridge uses an 8-stage filtration system to reduce chlorine, odour, rust and microscopic particles while maintaining normal water flow. The silver-finished units install without tools in seconds. Condition is new.
Suits owners of the MSS084 system
Buyers who already use the Mist MSS084 shower filter can keep water quality consistent with these drop-in cartridges. Households that prefer a different shower filter model or a whole-house treatment system will not be able to use these cartridges.
3,400-gallon or 3–4 month filter life
Each cartridge is rated for up to 3,400 gallons of water or roughly three to four months of use, whichever comes first. Operating limits are 40–120 °F and 20–125 psi at a 2 GPM flow rate. Replacing on schedule maintains the 8-stage filtration performance.
Highlights
- 8-stage filtration removes chlorine, odour, rust and microscopic particles
- Maintains normal shower pressure with a 2 GPM flow rate
- Each cartridge lasts up to 3,400 gallons or 3-4 months
- Simple DIY replacement fits the MSS084 shower filter
- Operates reliably between 40-120 °F and 20-125 psi
Specifications
| Type | Filtration Systems |
|---|---|
| Color/Finish | Silver |
Questions about this item
Will the MSC384 cartridge fit my MSS084 shower filter housing?
Yes, the MSC384 is the direct replacement cartridge designed for the Mist MSS084 shower filtration system.
What is the correct way to install the cartridge so I do not get leaks?
Unscrew the filter housing, remove the used cartridge, insert the new MSC384 with the flow arrow pointing in the direction of water travel, then hand-tighten the housing firmly; the step most people skip is checking the O-ring seat before tightening.
How often will I need to replace each cartridge in the 3-pack?
Replace each cartridge every 3 to 4 months or after 3,400 gallons of use, whichever comes first, at a flow rate of 2 GPM within 40 to 120 °F and 20 to 125 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



