We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular buck converter board in clear acrylic case with LCD screen and heat sink

Misskit

Misskit DC Buck Converter 5.3V-32V to 1.2V-32V 12A LCD power adapter

SKU CH-7YG3-2BH4K

Adjustable buck converter steps 5.3-32 V down to 1.2-32 V at up to 12 A with LCD readout and CC/CV protection

  • Changer TypePower Converter
  • Wide 1.2 V–32 V adjustable output from a 5.3 V–32 V input
  • LCD shows input voltage, output voltage, current and power in real time
  • Delivers 120 W continuously with built-in heatsink; up to 160 W with extra cooling
  • Reverse-connection, short-circuit and over-current protection keep the module safe
  • Voltage set to 0.05 V precision and current to 0.005 A precision

DC Buck Converter for Adjustable Power

The Misskit DC buck converter accepts an input range of 5.3V to 32V and delivers a variable output from 1.2V to 32V. It supports up to 12A current and 160W peak power with enhanced cooling. The built-in LCD screen shows input and output voltage, output current, and output power. Voltage precision is 0.05V and current precision is 0.005A. An acrylic case and heat sink protect the board from dust and aid thermal performance.

Simple Setup with Potentiometer Control

A potentiometer allows fast adjustment of voltage and current, while a button toggles output on and off and sets the default startup state. The package includes a user manual to guide wiring and configuration. Reverse-connection protection, short-circuit protection, and over-current protection prevent damage from common wiring mistakes. The acrylic enclosure keeps the circuit board clean during bench use or vehicle installation.

Step-Down Only with Thermal Limits

This module only steps voltage down; the input must always exceed the desired output. Continuous operation at 120W is rated with the supplied heat sink, while 160W requires additional cooling not included. The converter lacks isolation between input and output, so it cannot break ground loops in sensitive measurement setups. Buyers needing a boost function, galvanic isolation, or programmable presets should look elsewhere.

Highlights

  • Wide 1.2 V–32 V adjustable output from a 5.3 V–32 V input
  • LCD shows input voltage, output voltage, current and power in real time
  • Delivers 120 W continuously with built-in heatsink; up to 160 W with extra cooling
  • Reverse-connection, short-circuit and over-current protection keep the module safe
  • Voltage set to 0.05 V precision and current to 0.005 A precision

Specifications

Changer TypePower Converter

Questions about this item

How can I confirm the converter is regulating correctly after wiring it?

The LCD screen shows input and output voltage, output current and output power so you can verify the 1.2 V to 32 V output matches your setting.

What comes in the package and what must I source separately?

The module includes an acrylic case, heat sink and a user manual; you need to provide input power leads and output wiring yourself.

Should I run this at the 8 A continuous rating or push to the higher current figure?

For long-term use without extra cooling the converter delivers up to 8 A and 120 W; improved heat dissipation allows 12 A and 160 W.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.