minidodoca USB 3.1 Type-C Male to Male Test Board 24 Pin 2.54 mm with DuPont Wires
A USB 3.1 Type-C male-to-male test board with 24 labelled pins on a 2.54 mm pitch FR-4 PCB, supplied with DuPont wires for cable testing and DIY electronics
- TypeUSB Type C
- ColorGreen
- Changer TypeUSB Type C
- SpecificationsDevices with USB 3.1 Type-C ports
- Connector AUSB Type C
- Connector BUSB Type C
- Ready to use with all pins pre-soldered and labelled
- USB 3.1 rated at 10Gbps for fast data transfer
- 54 mm pitch header simplifies breadboard and prototype work
- Includes 12 male-to-female and 12 female-to-female DuPont wires
- FR-4 glass fibre board with green oil spray tin finish
USB 3.1 Type-C breakout board for developers
This USB 3.1 Type-C male-to-male test board exposes every pin on a 2.54 mm header so engineers and hobbyists can probe signals without soldering. Two boards arrive with all 24 pins pre-soldered and clearly labelled, plus DuPont wires for quick hook-up to test gear or custom circuits.
10 Gbps rated headroom with 3 A current limit
The board follows the USB 3.1 specification for 10 Gbps throughput, giving ample bandwidth for high-speed data captures. Rated current is 3 A, so sustained high-power delivery or heavy bus loading will hit the limit before the connector does.
Plugs into any USB-C port
Vertical 2.54 mm headers accept standard DuPont cables, letting you route individual lines to oscilloscopes, logic analysers or breadboards. The FR-4 board with green oil spray-tin finish handles repeated insertions, while the included male-to-female and female-to-female jumpers remove the need for custom wire prep.
Highlights
- Ready to use with all pins pre-soldered and labelled
- USB 3.1 rated at 10Gbps for fast data transfer
- 54 mm pitch header simplifies breadboard and prototype work
- Includes 12 male-to-female and 12 female-to-female DuPont wires
- FR-4 glass fibre board with green oil spray tin finish
Specifications
| Brand | minidodoca |
|---|---|
| Part Number | 2-Male to Female |
| Type | USB Type C |
| Color | Green |
| Changer Type | USB Type C |
| Specifications | Devices with USB 3.1 Type-C ports |
| Connector A | USB Type C |
| Connector B | USB Type C |
| Weight | 0.041 kilograms |
| Package Quantity | 1 |
Questions about this item
Will the 2.54 mm pin pitch on this test board match the 2.54 mm headers on my older prototype boards?
Yes, the board uses a 2.54 mm pin pitch that aligns with standard 0.1 inch headers found on many legacy prototype boards.
How can I confirm the USB 3.1 Type-C male connectors are making proper contact after plugging them in?
Each of the 24 pins is labelled on the green FR-4 PCB, so you can probe individual pins with a multimeter or oscilloscope to verify continuity and signal integrity.
Which DuPont wires are included and do I need any extra cables for a typical test setup?
The package supplies 12 male-to-female and 12 female-to-female DuPont wires alongside the two test boards; no additional cables are required for basic breakout testing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115342BTC
In stock
