We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular outdoor wireless access point with integrated directional antenna

Mimosa Networks

Mimosa Networks B24 24GHz 1.5 Gbps PtP access point

SKU CH-CX5K-MP8X3

Delivers 1.5 Gbps point-to-point wireless backhaul on 24 GHz with 2.4 GHz management radio and dual Ethernet or SFP+ links

  • StandardsIEEE 802.11b/g/n
  • Frequency Band2.4 GHz
  • AntennaExternal Antenna
  • WAN Ports1 x 10/100/1000M
  • 5 Gbps point-to-point throughput for high-capacity backhaul links
  • 24 GHz licensed band operation reduces interference in dense deployments
  • Auto-TDMA dynamically balances upstream and downstream traffic
  • Dual 2x2 MIMO radios with 256 QAM encoding maximise spectral efficiency
  • SFP+ fibre interface provides redundant long-haul connectivity

Purpose-built point-to-point backhaul

The Mimosa B24 is a 24 GHz wireless access point designed for fixed PtP links that need up to 1.5 Gbps of directional throughput. It targets broadband providers and enterprise networks building suburban or urban backhaul where fibre deployment is impractical or too costly.

Sustained-load behaviour with Auto-TDMA

Auto-TDMA technology dynamically shifts Gigabit-class capacity between upstream and downstream directions to match real-time traffic patterns. This avoids the spectrum waste of symmetric FDD operation and keeps latency low even when the link runs continuously at high utilisation across four MIMO streams with 256 QAM encoding.

Replaces legacy FDD radios and single-radio links

The B24 upgrades installations that rely on fixed symmetric radios or single-stream PtP gear by adding dual-stream radios on non-contiguous frequencies and dual-link Ethernet fail-over with SFP+ fibre support. The jump is worth it when asymmetric traffic profiles, spectrum efficiency or redundant uplinks are required for the deployment.

Highlights

  • 5 Gbps point-to-point throughput for high-capacity backhaul links
  • 24 GHz licensed band operation reduces interference in dense deployments
  • Auto-TDMA dynamically balances upstream and downstream traffic
  • Dual 2x2 MIMO radios with 256 QAM encoding maximise spectral efficiency
  • SFP+ fibre interface provides redundant long-haul connectivity

Specifications

BrandMimosa Networks
StandardsIEEE 802.11b/g/n
Frequency Band2.4 GHz
AntennaExternal Antenna
WAN Ports1 x 10/100/1000M

Questions about this item

How much power does the B24 draw when it is running all day?

The unit uses a low-power Gigabit Ethernet interface rated at 10/100/1000-BASE-T, so its daily consumption stays modest compared with higher-wattage backhaul radios.

What cabling or modules must I already have to connect the B24?

You need a standard Cat5e or better Ethernet cable for the 10/100/1000M WAN port, and an SFP+ transceiver if you plan to use the fiber-capable interface.

Will the B24 interfere with my existing 2.4 GHz Wi-Fi gear?

The B24 operates on 24 GHz for the backhaul link while keeping a separate 2.4 GHz 802.11 b/g/n radio for local management, so the two frequency bands stay isolated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.