We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small square green circuit boards with infrared components and pin headers

Mimo Tech

Mimo Tech ESP8285 Infrared WiFi Transceiver Module 10pcs Kit

SKU CH-7D2R-3R4NG

A kit of ten ESP8285 Wi-Fi modules with infrared send and receive for smart-home automation

  • ProtocolHomekit
  • TypeAutomation Hub / Controller
  • Control home appliances via infrared and Wi-Fi using the ESP8285 chip
  • Program with familiar ESP8266 codebase and flash firmware over USB-to-UART
  • Operate reliably from -25 °C to 85 °C at 5 % to 95 % humidity
  • Compact 23.4 × 23.4 × 18 mm board fits tight enclosures
  • Ten modules included for multi-room or development deployments

Infrared WiFi Transceiver Kit

This kit contains ten ESP8285 modules that combine Wi-Fi connectivity with infrared transmit and receive circuits. Each board is designed for developers and hobbyists who want to add remote-control automation to a smart-home platform such as HomeKit.

Integration and Expansion

Every module runs on a 5 V supply and exposes a dedicated programming header for firmware updates via a USB-to-UART adapter. The compact 23.4 mm square footprint leaves room for multiple units in a single enclosure, freeing GPIO pins on a host controller for other sensors or actuators.

Sustained Operation

Rated for continuous use from -25 °C to 85 °C at up to 95 % relative humidity, the boards maintain stable wireless and infrared performance during long automation cycles. Firmware can be refreshed in-circuit without removing the module from its installed position.

Highlights

  • Control home appliances via infrared and Wi-Fi using the ESP8285 chip
  • Program with familiar ESP8266 codebase and flash firmware over USB-to-UART
  • Operate reliably from -25 °C to 85 °C at 5 % to 95 % humidity
  • Compact 23.4 × 23.4 × 18 mm board fits tight enclosures
  • Ten modules included for multi-room or development deployments

Specifications

ProtocolHomekit
TypeAutomation Hub / Controller

Questions about this item

How many modules can draw 5 V simultaneously before the supply voltage drops?

Each module is rated for DC 5 V; the kit contains 10 pieces, so the power source must deliver enough current for all 10 at once.

What temperature range can the board tolerate during continuous operation?

The operating temperature range is -25 to 85 °C with humidity between 5 and 95 % RH.

Which additional hardware is required to flash new firmware onto a module?

A USB-to-UART converter is needed to connect the module to a PC for flashing via FLASH DOWNLOAD TOOLS V 3.6.4.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.