We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ball valve with lever handle and sweat ends

Milwaukee Valve

Milwaukee Valve UPBA485B 1 in manual 2-way brass ball valve sweat connection

SKU CH-MQS2-HNB4K

Manual two-way brass ball valve with sweat connection, full-port chrome-plated ball and locking lever handle rated for 600 psi water service

  • TypeOther
  • Manual two-way control for water systems
  • Full-port 1 in brass body with chrome-plated ball
  • Lever handle with locking feature for secure positioning
  • Rated to 600 psi operating pressure and 29.92 in Hg vacuum
  • Sweat connection for permanent copper pipe installation

Product Identity

The Milwaukee Valve UPBA485B is a 1-inch manual two-way ball valve constructed from brass with a chrome-plated brass ball. It features a straight, two-piece body style and full-port design for unrestricted flow. A sweat connection ensures secure copper piping installation. A locking lever handle provides positive shut-off control for water supply lines.

Intended Use and Limits

This valve suits plumbers and facility managers needing reliable isolation for water systems up to 600 psi operating pressure. It is not rated for steam service or combustible gas applications. The 3-A sanitary standard compliance is not rated, so it should not be specified for high-purity or food-grade processing requirements. Vacuum service is rated to 29.92 in Hg for relevant installations.

Deciding Specification

The 1-inch nominal size with sweat-end connections determines whether this valve fits the existing copper piping without adapters. Verify the tube diameter matches this nominal size before purchase. The full-port chrome-plated brass ball and 600 psi pressure rating confirm suitability for standard residential and commercial water distribution tasks.

Highlights

  • Manual two-way control for water systems
  • Full-port 1 in brass body with chrome-plated ball
  • Lever handle with locking feature for secure positioning
  • Rated to 600 psi operating pressure and 29.92 in Hg vacuum
  • Sweat connection for permanent copper pipe installation

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

Will this 1-inch sweat valve fit onto the existing copper piping in my older plumbing system?

The valve has a 1-inch sweat connection designed for standard copper tubing; clean the pipe ends, apply flux, and solder the valve in place for a permanent joint.

How can I confirm the chrome-plated brass ball is sealing correctly after installation?

Pressurise the system up to the 600 psi rating, cycle the locking lever through its full travel several times, and inspect all joints for any sign of leakage.

Does the box contain only the valve body or are the locking lever handle and any solder rings included?

The valve ships with the brass body, chrome-plated ball, and locking lever handle assembled; solder and flux for the sweat connections must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.