We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ball valve with press and hose cap connections

Milwaukee Valve

Milwaukee Valve UPBA-480BH 1/2" Press x Hose Cap Brass Ball Valve

SKU CH-XN0G-2ETJ6

A two-piece brass ball valve with a 1/2-inch press connection and hose cap rated for 200 psi water service

  • TypeOther
  • Full-port design ensures unrestricted water flow
  • Brass body with chrome-plated ball resists corrosion
  • 200 psi operating pressure handles demanding supply lines
  • Lever handle allows quick manual shut-off
  • Vacuum-rated to 29.92 in Hg for versatile installations

1/2" Brass Ball Valve

This manual two-way ball valve has a brass body with a chrome-plated brass ball and full-port design. It connects via a 1/2 inch press fitting on one end and a hose cap on the other. The straight-pattern valve is rated for water service at a maximum operating pressure of 200 psi and handles vacuum up to 29.92 in Hg. It suits residential or light-commercial plumbing installations requiring inline shut-off.

Installation notes

The press connection requires a compatible press tool and jaw set sized for 1/2 inch tubing to form a leak-free joint. No threading or soldering is needed, but the tubing must be cut square, deburred and inserted to the full depth marked on the fitting. Common issues include insufficient press force, misaligned jaws or debris on the sealing surface, any of which can cause weeping or joint failure.

Pressure and media limits

The valve is rated for 200 psi maximum operating pressure with water and carries a vacuum rating of 29.92 in Hg. Steam service, combustible gas service and 3-A sanitary compliance are not rated, so the valve must not be used in those applications. The non-locking lever handle provides manual operation only; automated actuation is not supported.

Highlights

  • Full-port design ensures unrestricted water flow
  • Brass body with chrome-plated ball resists corrosion
  • 200 psi operating pressure handles demanding supply lines
  • Lever handle allows quick manual shut-off
  • Vacuum-rated to 29.92 in Hg for versatile installations

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

How can I confirm the valve is working correctly after installation?

Pressurize the system up to 200 psi and inspect the press and hose-cap joints for leaks; the lever handle should operate smoothly from fully open to fully closed.

What components are included and what must I supply separately?

The valve body with press and hose-cap ends is supplied; you must provide the pressing tool, compatible tubing, and any thread sealant or hose clamps required for your piping.

Which version should I choose for a standard residential water line?

Select the 1/2 inch full-port model with 200 psi rating and brass construction for typical cold and hot water distribution.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.