We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass two-way ball valve with lever handle, 3/4 inch press connection

Milwaukee Valve

Milwaukee Valve UPBA-480B 3/4" Manual 2-Way Ball Valve Press Brass

SKU CH-NEY7-BJPFR

A manual two-way brass ball valve for water service with a 3/4 inch full-port design rated to 200 psi operating pressure

  • TypeOther
  • Full-port design delivers unrestricted flow
  • Brass body withstands 200 psi operating pressure
  • Lever handle enables quick manual operation
  • Vacuum-rated to 29.92 in Hg for versatile use
  • Two-piece construction simplifies maintenance

3/4" Brass Press Ball Valve

The Milwaukee Valve UPBA-480B is a 3/4 inch manual two-way ball valve built from brass for water service. Its two-piece body uses a press connection style and a full-port chrome-plated brass ball. The lever handle is non-locking and the valve is rated for 200 psi operating pressure. It suits residential and light commercial plumbing installations.

Press installation requires proper tooling

The press-end design demands a compatible press tool and jaw set matched to the 3/4 inch size to form a permanent, leak-free seal. Improper tool calibration or debris on the tube end are the most common causes of joint failure. Once pressed the connection cannot be disassembled, so alignment must be checked before the press cycle is started.

Full-port flow with defined pressure ceiling

The full-port ball maintains the full 3/4 inch bore through the valve, minimising pressure drop across the fitting. The 200 psi operating limit and 29.92 in Hg vacuum rating set the practical envelope for water systems. Steam and combustible gas duties are not rated, so the valve must not be used in those services.

Highlights

  • Full-port design delivers unrestricted flow
  • Brass body withstands 200 psi operating pressure
  • Lever handle enables quick manual operation
  • Vacuum-rated to 29.92 in Hg for versatile use
  • Two-piece construction simplifies maintenance

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

How can I confirm the valve is working after pressing it onto the pipe?

Pressurise the system up to 200 psi and check for leaks; the lever should turn smoothly with full port flow.

What comes in the box and what fittings must I buy separately?

The valve body with lever handle is included; press fittings, pipe and any press tool are not supplied.

Which version should I choose for a standard residential water line?

The 3/4 in full port brass model rated for 200 psi water service fits typical residential supply lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.