Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941173BTC
In stock
Milwaukee Valve
Milwaukee Valve UP668 1-1/2" Gate Valve Brass Sweat
A 1-1/2 inch brass gate valve with sweat connection rated for 200 psi water service and a Cv of 135
- TypeOther
- Brass construction resists corrosion for long service life
- Sweat connection enables secure copper pipe installation
- 200 psi rating handles demanding water supply systems
- Non-rising stem design fits confined installation spaces
- 135 Cv coefficient delivers high flow capacity
Product Identity
The Milwaukee Valve UP668 is a 1-1/2 inch brass gate valve with a sweat connection designed for water supply lines. It features a solid forged brass wedge, brass stem, and a screw-in bonnet operated by a wheel handle. The valve carries a 200 psi operating pressure rating and a Cv of 135 for flow capacity.
Suitable Installations
This valve suits plumbing systems requiring a full-port shut-off for water where a sweat joint is specified and 200 psi pressure class is sufficient. Installers needing a rising stem, threaded or flanged ends, or a higher pressure rating for steam service should look at alternative valve types.
Decisive Specification
The sweat connection type determines whether this valve fits the piping assembly; it requires copper tubing and soldering tools for installation. Verify that the 1-1/2 inch nominal size and 200 psi water rating match the system design before purchasing.
Highlights
- Brass construction resists corrosion for long service life
- Sweat connection enables secure copper pipe installation
- 200 psi rating handles demanding water supply systems
- Non-rising stem design fits confined installation spaces
- 135 Cv coefficient delivers high flow capacity
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Type | Other |
Questions about this item
What does the 135 Cv rating mean for actual water flow?
A Cv of 135 indicates the valve allows 135 US gallons per minute of water at a 1 psi pressure drop, so it supports high-volume supply lines with minimal restriction.
How does the sweat connection work with copper pipe?
The sweat end is sized for 1-1/2 inch copper tubing; you clean, flux, insert the tube, and solder the joint for a permanent leak-free seal.
What clearance is needed for the wheel handle and bonnet?
The non-rising stem keeps the wheel at a fixed height, so you only need room above the bonnet for hand operation and the screw-in bonnet for occasional packing adjustments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
