Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00938448BTC
In stock
Milwaukee Valve
Milwaukee Valve UP667 3/4" Gate Valve Brass 200 psi
Brass gate valve rated 200 psi with 32 Cv flow capacity and non-rising stem
- TypeOther
- Reliable water control with 200 psi brass construction
- Smooth operation via non-rising brass stem and wheel handle
- High flow capacity rated at Cv 32 for efficient supply
- Lead-safe brass body meets low-lead plumbing requirements
- Secure NPT female connection with screw-in bonnet design
Application & purpose
The Milwaukee Valve UP667 is a 3/4 inch brass gate valve rated for 200 psi water service. It suits residential and light commercial plumbing where a full-bore shut-off is required. The low-lead brass construction meets current drinking-water regulations. Buyers needing a valve for steam lines or higher pressure ratings should look elsewhere.
Pre-installation checks
Verify that the piping uses 3/4 inch female NPT threads to match the valve connections. Confirm the system operating pressure does not exceed 200 psi and that the media is water, as steam service is not applicable. Ensure there is sufficient clearance for the wheel handle to operate fully. The non-rising stem design means the handle does not indicate valve position visually.
Build & daily use
The body, bonnet, stem, wedge, seat and seal are all brass with a screw-in bonnet style. A flow coefficient of 32 provides low restriction when the valve is fully open. The wheel handle allows gradual opening and closing to reduce water hammer. Brass-on-brass seating resists corrosion in potable water systems. Periodic operation prevents mineral build-up on the solid wedge.
Highlights
- Reliable water control with 200 psi brass construction
- Smooth operation via non-rising brass stem and wheel handle
- High flow capacity rated at Cv 32 for efficient supply
- Lead-safe brass body meets low-lead plumbing requirements
- Secure NPT female connection with screw-in bonnet design
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Type | Other |
Questions about this item
Does the UP667 gate valve come with pipe fittings or do I need to buy them separately?
The valve has 3/4 in female NPT threads on both ends; pipe nipples or adapters are not included and must be purchased separately.
How do I choose between the available versions of this 3/4 in gate valve?
The UP667 is offered in a single configuration — 3/4 in low-lead brass with a 200 psi rating and 32 Cv — so there are no alternate versions to select.
What does the 200 psi rating mean when the valve is installed in a household water line?
It indicates the maximum operating pressure the brass body and brass seat can withstand continuously in cold-water service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
