Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933729BTC
In stock
Milwaukee Valve
Milwaukee Valve UP667 1-1/4" Gate Valve Low Lead Brass
Controls water flow in plumbing systems using a 1-1/4 inch brass gate valve rated for 200 psi with a 97 Cv coefficient
- TypeOther
- Low-lead brass construction reduces lead exposure
- Rated for 200 psi working pressure handles demanding water systems
- Non-rising stem design saves installation space
- 97 Cv flow coefficient ensures high-capacity delivery
- Brass wedge and seat resist corrosion for long service
Milwaukee Valve UP667 Gate Valve
The Milwaukee Valve UP667 is a 1-1/4 inch gate valve designed for water service in residential and commercial plumbing systems. It provides a straight-through flow path with minimal pressure drop when fully open, making it suitable for on-off isolation rather than throttling applications. The low-lead brass construction meets current regulatory requirements for potable water installations.
Low Lead Brass Construction With NPT Threading
The valve body, bonnet, stem, wedge, seat and seal are all manufactured from brass, with a screw-in bonnet style that secures the internal components. A non-rising stem with a wheel handle allows operation in confined spaces where vertical clearance is limited, while the solid wedge design ensures a tight shut-off against the brass seats. Female NPT threads on the inlet and outlet enable direct connection to standard threaded pipe without additional adapters.
Rated For 200 PSI Water Service
The valve carries a maximum operating pressure of 200 psi for water at ambient temperature, with a coefficient of volume (Cv) of 97 indicating high flow capacity when fully open. Brass-on-brass seating surfaces provide reliable sealing over repeated cycles, and the all-metal construction resists degradation from typical water conditions. Steam service is not rated, so the valve should be confined to cold and hot water distribution lines within the stated pressure limit.
Highlights
- Low-lead brass construction reduces lead exposure
- Rated for 200 psi working pressure handles demanding water systems
- Non-rising stem design saves installation space
- 97 Cv flow coefficient ensures high-capacity delivery
- Brass wedge and seat resist corrosion for long service
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Type | Other |
Questions about this item
What does the 200 psi rating mean for daily water-line use?
It is the maximum operating pressure the valve body is designed to hold, so the supply pressure must stay at or below 200 psi.
What thread type mates with the 1-1/4 in female NPT connections?
Male NPT pipe threads of the same nominal size are required for a proper seal.
How is the non-rising stem installed so the wheel handle operates correctly?
Thread the screw-in bonnet into the body, then turn the wheel to raise or lower the solid brass wedge without the stem moving up or down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
