We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Low-lead brass gate valve with wheel handle, 1-1/2 inch NPT female connections

Milwaukee Valve

Milwaukee Valve UP667 1-1/2 in Gate Valve Low Lead Brass

SKU CH-3T7J-3AKA9

Controls water flow in 1-1/2 inch piping with a 200 psi rating and 135 Cv

  • TypeOther
  • Low-lead brass construction meets potable-water safety standards
  • 200 psi operating pressure handles demanding residential and commercial systems
  • 135 Cv rating delivers high flow capacity with minimal pressure drop
  • Non-rising stem design saves installation space and simplifies operation
  • All-brass internals resist corrosion for long service life

Milwaukee Valve UP667 Gate Valve

The Milwaukee Valve UP667 is a 1-1/2 inch gate valve constructed from low-lead brass for water media. It features a non-rising brass stem, solid brass wedge, and brass seat and seal materials. The screw-in bonnet and female NPT connections provide a secure installation for plumbing systems.

Suitable for standard water lines needing 200 psi

This valve suits installers needing a reliable shut-off with a Cv of 135 for water applications. It is not intended for steam service as the maximum steam pressure is not applicable. Buyers requiring flanged connections or rising stem designs should look at alternative valve types.

Handles water flow up to 200 psi

The valve comfortably handles water media within its 200 psi operating pressure limit and offers a flow coefficient of 135. It runs out of headroom for steam applications or systems exceeding the stated pressure rating. The brass construction ensures durability for standard potable water plumbing installations.

Highlights

  • Low-lead brass construction meets potable-water safety standards
  • 200 psi operating pressure handles demanding residential and commercial systems
  • 135 Cv rating delivers high flow capacity with minimal pressure drop
  • Non-rising stem design saves installation space and simplifies operation
  • All-brass internals resist corrosion for long service life

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

Does the 1-1/2 in NPT female inlet need a matching male thread on my supply pipe?

Yes, the valve has a 1-1/2 in NPT female connection on each side, so the adjoining pipe or fitting must provide a male NPT thread of the same size to seal properly.

Will the solid brass wedge and non-rising stem operate smoothly in an existing line that already has 200 psi water pressure?

The valve is rated for 200 psi maximum operating pressure with a Cv of 135, so it will handle that pressure and flow as long as the system stays within the rated limit.

How can I confirm the gate is fully open after installation?

Turn the wheel handle counter-clockwise until it stops; the non-rising stem means the handle position does not change height, but the mechanical stop indicates the wedge is fully retracted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.