We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze globe valve with hand wheel and rising stem

Milwaukee Valve

Milwaukee Valve UP502 1/2" Globe Valve Bronze FNPT 300 psi

SKU CH-RD5B-KSY7K

Controls fluid flow in 1/2-inch piping with a rising-stem bronze body rated for 300 psi and 200 °F

  • TypeOther
  • Reliable flow control with rising stem design
  • Durable low-lead bronze body resists corrosion
  • Secure FNPT threaded connections prevent leaks
  • Handles fluid up to 200 degrees F
  • Rated for 300 psi working pressure

1/2" Globe Valve for Fluid Control

The Milwaukee Valve UP502 is a 1/2 inch globe valve designed to regulate fluid flow in residential or light commercial plumbing systems. Its bronze body and brass stem suit potable water lines where low-lead materials are required. Installers who need a reliable shut-off or throttling point for hot or cold water will find the hand-wheel operation straightforward.

FNPT Threaded Connections Simplify Installation

The valve uses female National Pipe Thread connections on both inlet and outlet, so it threads directly onto standard 1/2 inch male pipe ends without adapters. A screw-in bonnet allows the stem assembly to be serviced without removing the valve body from the line. The compact 2 5/16 inch face-to-face length leaves more room in tight wall cavities or mechanical rooms.

Rated for 300 psi at 200 °F

The bronze construction handles a maximum fluid pressure of 300 psi and a maximum fluid temperature of 200 degrees Fahrenheit, covering typical hot-water distribution temperatures. Steam and compressed air service are not rated, so the valve should be limited to liquid applications. The rising-stem design gives a clear visual indication of valve position during operation.

Highlights

  • Reliable flow control with rising stem design
  • Durable low-lead bronze body resists corrosion
  • Secure FNPT threaded connections prevent leaks
  • Handles fluid up to 200 degrees F
  • Rated for 300 psi working pressure

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

What is the maximum fluid temperature this 1/2" bronze globe valve can handle during continuous operation?

The valve is rated for a maximum fluid temperature of 200 Degrees F, which defines its thermal limit under sustained use.

How much heat does the valve body dissipate when controlling hot fluid at 300 psi all day?

As a passive bronze component with a rising stem and hand wheel, it generates no operational heat; the fluid temperature reaches 200 Degrees F maximum.

Which piping components must already be in place to install this FNPT globe valve?

You need mating 1/2 inch FNPT threaded pipe ends and appropriate thread sealant to connect the valve into the line.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.