We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze globe valve with hand wheel and sweat connections

Milwaukee Valve

Milwaukee Valve UP1502 2" Globe Valve, Solder, Low Lead Bronze

SKU CH-0PA9-6PRCN

A 2-inch solder globe valve in low-lead bronze rated for 300 psi fluid pressure and 200 °F maximum temperature

  • TypeOther
  • Solder connection creates leak-free joints without threading tools
  • Low-lead bronze body meets modern potable-water standards
  • 300 psi fluid-pressure rating handles demanding supply lines
  • 200 °F maximum fluid temperature suits hot-water systems
  • Rising-stem hand-wheel design gives clear visual valve position

2-Inch Bronze Globe Valve

The Milwaukee Valve UP1502 is a 2-inch globe valve built from low-lead bronze for fluid control in plumbing systems. It uses sweat-to-sweat solder connections and a rising-stem design operated by a hand wheel. This valve suits installers who need a bronze body rated for 300 psi fluid pressure and 200 degrees F maximum fluid temperature. It is not for steam service or compressed air lines because those pressures are not rated.

Sweat Connection and Pressure Limits

The valve joins copper pipe through soldered sweat ends and carries a 300 psi fluid pressure rating at 200 degrees F. Steam pressure and air pressure are not rated, so the valve must not be used in those services. The rising stem moves vertically when the hand wheel turns, giving visible indication of the open or closed position. The screw-in bonnet and bronze stem complete the pressure boundary.

Verify Pipe Size and Service Before Ordering

Confirm the piping is 2-inch copper tubing suitable for sweat soldering and that the system operates within the 300 psi fluid and 200 degrees F limits. The valve body measures 5 15/16 inches from inlet to outlet and 6 3/4 inches from the top of the hand wheel to the inlet center. Ensure the installation allows enough clearance for the hand wheel and stem travel, and that the fluid media is compatible with bronze construction.

Highlights

  • Solder connection creates leak-free joints without threading tools
  • Low-lead bronze body meets modern potable-water standards
  • 300 psi fluid-pressure rating handles demanding supply lines
  • 200 °F maximum fluid temperature suits hot-water systems
  • Rising-stem hand-wheel design gives clear visual valve position

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

Should I choose the 2 in. solder globe valve or a different size?

This model is a 2 in. sweat-by-sweat globe valve; select it when your piping is 2 in. copper and you need a soldered connection.

What does the 300 psi fluid pressure rating mean once installed?

It indicates the valve can handle up to 300 psi of non-shock cold water pressure in the line.

How does the sweat connection affect the pressure limit?

The sweat ends do not change the 300 psi rating; proper soldering maintains the full pressure capability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.