Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940043BTC
In stock
Milwaukee Valve
Milwaukee Valve UP115 1 1/2 Gate Valve Bronze
A bronze gate valve rated for 300 psi water service with a 135 Cv flow coefficient and sweat connection
- TypeOther
- Reliable water control with 300 psi pressure rating
- Long-lasting bronze body resists corrosion in plumbing systems
- Solid bronze wedge ensures tight shut-off every time
- Non-rising brass stem saves space during installation
- High flow capacity with Cv 135 for efficient operation
1-1/2 Inch Bronze Gate Valve for Water Lines
The Milwaukee Valve UP115 is a solder-end gate valve with a bronze body and solid bronze wedge rated for 300 psi water service. Its non-rising brass stem and wheel handle suit residential and light-commercial plumbing installations where full-flow shut-off is required.
Verify Sweat Connection
Confirm the existing piping uses 1-1/2 inch copper tubing prepared for sweat soldering, as the valve has no threaded or flanged ends. Ensure the system operating pressure does not exceed 300 psi and that the media is water, since steam service is not applicable for this model.
Fits Inline on Copper Pipe Runs Requiring
The screw-in bronze bonnet and bronze seat allow the valve to be installed directly into the pipeline without additional adapters, freeing space that a rising-stem design would need above the handle. The 135 Cv coefficient indicates high flow capacity with minimal restriction when the gate is fully open.
Highlights
- Reliable water control with 300 psi pressure rating
- Long-lasting bronze body resists corrosion in plumbing systems
- Solid bronze wedge ensures tight shut-off every time
- Non-rising brass stem saves space during installation
- High flow capacity with Cv 135 for efficient operation
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Type | Other |
Questions about this item
Does the Milwaukee Valve UP115 gate valve include the solder fittings or must they be purchased separately?
The valve has a sweat connection on one side; the copper pipe and solder are not included and must be bought separately.
How do I choose between the available versions of the UP115?
The product is offered as a single configuration — 1 1/2 inch nominal size, sweat connection, bronze body, non-rising stem, wheel handle — so no version choice is required.
What does the 300 psi operating-pressure rating mean when the valve is installed in a water system?
It indicates the maximum continuous water pressure the bronze body and bronze seat are designed to withstand at ambient temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
